Max2Play Home › Forums › Max2Play on Raspberry PI › Ethernet and IP problems. Cannot set up Max2Play on Raspberry Pi 4 › Reply To: Ethernet and IP problems. Cannot set up Max2Play on Raspberry Pi 4
Hello again, I’ve had a chance to test the RPi 4 with Raspberry Pi OS with a monitor, and both the ethernet and Wifi have successfully connected to the router with an IP and MAC address. I then tested it headless (with the wifi SSID and password already set up on RPi OS), and it worked again.
Then I tested again with Max2Play, the only difference being the OS, and the ethernet did not connect. The wifi obviously didn’t connect because I hadn’t entered the SSID or password).
So, it seems to be Max2Play (Buster) that’s causing the problem.
On screen it says „boot: mode USB-MSD 4 order f41 retry 0/128 restart 53/-1“, „SD card detected“, „net:down“, „start4.elf: is not compatible“, „This board requires newer software“, and plenty of other things
If you let me know what information you might need I’ll try my best to supply it.
Thanks.