Reply To: Boot stuck at time syncho with HifiBerry Amp2

Max2Play Home 2016 (en) Forums Max2Play on Raspberry PI Boot stuck at time syncho with HifiBerry Amp2 Reply To: Boot stuck at time syncho with HifiBerry Amp2

24. Juni 2020 at 12:18 #49079

Hi!

I’ve got the same issue with following setup (4x same):
Raspberry Pi 4B
SD Card: SanDisk Extreme 64GB
Flashing software: Win32 DiskImager
Board: HifiBerry Amp2
Power supply: 18V/5A

Solution is to update the config.txt which incldues the line dtoverlay=iqaudio-dacplus.
Replace this line with your correct hardware, in my case dtoverlay=hifiberry-dacplus for a HifiBerry Amp2 and boot up works!

Here you can find an overview: https://www.hifiberry.com/docs/software/configuring-linux-3-18-x/

I’m happy about positive feedback – or also if it doesn’t work.

By the way, OpenELEC is discontinued since 2017 😉

Matthias