Reply To: Official 7" display will not go off in the new stretch image

Max2Play Home 2016 (en) Forums Max2Play on Raspberry PI Official 7" display will not go off in the new stretch image Reply To: Official 7" display will not go off in the new stretch image

29. Dezember 2019 at 15:49 #47845

Neiher Analog- nor Digital-Clock Screen Savers is working in image: m2p_stretch_rpi_251_7zoll.img.
I had only installed Hifiberry and Run-Command extensions, the image should work out-of-the-box as you state on the page.
Nor after updating the screen savers worked.
Nor WiFi-setup is working, after turning off the WPS and (fallback) access-point then the manual setup didnt work. But I SSH’ed it and ran the WiFi-setup in Raspi-config then the WiFi worked.
Nor mounting of an 64 Gb Medion – Drive worked.
Had to reformat (even though it came with exfat-format on) and then had to edit fstab like in https://pimylifeup.com/raspberry-pi-exfat/
UPDATE: Solved: had to select Joggler Skin – who would know that that is the „m2p“-skin

  • This reply was modified 11 months ago by  Jacob.
  • This reply was modified 11 months ago by  Jacob.
  • This reply was modified 11 months ago by  Jacob.
  • This reply was modified 11 months ago by  Jacob.