Max2Play Home › Forums › Max2Play on Raspberry PI › Can't get MAX2Play on Raspberry Pi 0/W with HifiBerry Amp 2 to work › Reply To: Can't get MAX2Play on Raspberry Pi 0/W with HifiBerry Amp 2 to work
Both error messages are inconsequential. The first occurs on all boot sequences and is due to the fact these interfaces aren’t loaded yet within the sequence of events and the second is about the HDD idle time for connected HDDs.
I should mention that we do not recommend using a device like the AMP2 with a RPi zero. Please have an eye on the Health Checker in Settings/Reboot when using it. If you have a 5V PSU, please try booting the Pi without the AMP2 and letting it set up the automatic access point. Then follow the instructions to set up your WiFi credentials while in access point mode.