Reply To: [Announce] New Max2Play Image for Raspberry Pi 4

Max2Play Home Forums Max2Play on Raspberry PI [Announce] New Max2Play Image for Raspberry Pi 4 Reply To: [Announce] New Max2Play Image for Raspberry Pi 4

1. August 2019 at 13:46 #46628

I wanted to test this out on my Pi 4 with 4GB RAM.

It works and I hooked it up to a blue tooth speaker and worked real good.

Went to bed and got up the next morning and went to play some music with it but it did not.

Said to connect to the blue tooth and it say’s connected and in about 3 sec. Say’s disconnected.

I did this like 10 times. Turn off and on the blue tooth and right away says connected then disconnected right after that.

Did all I could think of removed it and connected it again. Just did not reboot the Pi 4 I guess should do that.

Here is some info copy and past from it.

Agent registered
agent off
Agent unregistered
agent NoInputNoOutput
devices
Device 27:3A:57:40:2B:F5 T2
Agent registered
trust 27:3A:57:40:2B:F5
Changing 27:3A:57:40:2B:F5 trust succeeded
pair 27:3A:57:40:2B:F5
Attempting to pair with 27:3A:57:40:2B:F5
Failed to pair: org.bluez.Error.AlreadyExists
connect 27:3A:57:40:2B:F5
Attempting to connect to 27:3A:57:40:2B:F5
Device 27:3A:57:40:2B:F5 Connected: yes
Name: T2
Address: 27:3A:57:40:2B:F5
Icon: audio-card
Class: 0x340404
Paired: 1
Connected: 1

#### Bluetooth Installation ####

#### Bluetooth Dongle ####
hci0: Type: Primary Bus: UART
BD Address: DC:A6:32:07:7E:85 ACL MTU: 1021:8 SCO MTU: 64:1
UP RUNNING PSCAN ISCAN
RX bytes:157803 acl:331 sco:0 events:17345 errors:0
TX bytes:16760504 acl:33441 sco:0 commands:344 errors:0

#### DEVICE T2 ####
[27:3A:57:40:2B:F5]
Name: T2
Alias: T2 [rw]
Address: 27:3A:57:40:2B:F5
Icon: audio-card
Class: 0x340404
Paired: 1
Trusted: 1 [rw]
Blocked: 0 [rw]
Connected: 1
UUIDs: [SerialPort, AudioSink, AVRemoteControlTarget, AdvancedAudioDistribution, AVRemoteControl, Handsfree, PnPInformation]

#### BLUEALSA RUNNING ####
1

-Raymond Day

  • This reply was modified 4 years, 8 months ago by Raymond Day.