Reply To: [UPDATE BUG FIX] Bluetooth Addon BETA

24. Juli 2019 at 17:24 #46473

Hello

My pi2 can’t connect to a Bluetooth CSR 4.0 dongle. Package info mentions different windows flavours as OS – do I need a special dongle for linux? I installed a fresh image last week. (M2P opt. for touch display) – version 2.50.

I would like to stream music from my phone to squeezebox.

Error message:
Bluetooth-Dongle: Not working correctly – Restart Device!
Bluetoothsink Available: Not Setup
Pulseaudio: 1

Debug:
#### Bluetooth Installation ####

#### Bluetooth Dongle ####
hci0: Type: BR/EDR Bus: USB
BD Address: 00:1A:7D:DA:71:11 ACL MTU: 679:9 SCO MTU: 48:16
DOWN
RX bytes:1148 acl:0 sco:0 events:60 errors:0
TX bytes:736 acl:0 sco:0 commands:60 errors:0

#### PACMD LIST | grep active ####
active port: <analog-output>
active port: <analog-output>
active profile: <output:analog-stereo>
active profile: <output:analog-stereo>

#### PACMD LIST | grep sink ####
Default sink name: alsa_output.0.analog-stereo
module.description = „When a bluetooth sink or source is added, load module-loopback“
module.description = „Automatically restore the default sink and source“
module.description = „When a sink/source is removed, try to move its streams to the default sink/source“
name: <module-always-sink>
module.description = „Always keeps at least one sink loaded even if it’s a null one“
module.description = „When a sink/source is idle for too long, suspend it“
module.description = „Load filter sinks automatically when needed“
2 sink(s) available.
sinks:
sinks:
0 sink input(s) available.

#### X-SERVER RUNNING ####
1

#### PULSEAUDIO RUNNING ####
1 S 1000 1524 1 0 80 0 – 25973 – ? 00:00:00 pulseaudio
1 S 1000 1545 1 0 80 0 – 478 – ? 00:00:00 start-pulseaudi

#### PACMD LIST-CARDS | DEBUG COMPLETE ####
2 card(s) available.
index: 0
name: <alsa_card.0>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = „0“
alsa.card_name = „bcm2835 ALSA“
alsa.long_card_name = „bcm2835 ALSA“
device.bus_path = „/devices/virtual/sound/card0“
sysfs.path = „/devices/virtual/sound/card0“
device.string = „0“
device.description = „bcm2835 ALSA“
module-udev-detect.discovered = „1“
device.icon_name = „audio-card“
profiles:
output:analog-mono: Analog Mono Output (priority 100, available: unknown)
output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <output:analog-stereo>
sinks:
alsa_output.0.analog-stereo/#0: bcm2835 ALSA Analog Stereo
sources:
alsa_output.0.analog-stereo.monitor/#0: Monitor of bcm2835 ALSA Analog Stereo
ports:
analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
properties:

index: 1
name: <alsa_card.platform-soc_sound>
driver: <module-alsa-card.c>
owner module: 26
properties:
alsa.card = „1“
alsa.card_name = „snd_rpi_hifiberry_dacplus“
alsa.long_card_name = „snd_rpi_hifiberry_dacplus“
alsa.driver_name = „snd_soc_hifiberry_dacplus“
device.bus_path = „platform-soc:sound“
sysfs.path = „/devices/platform/soc/soc:sound/sound/card1“
device.string = „1“
device.description = „snd_rpi_hifiberry_dacplus“
module-udev-detect.discovered = „1“
device.icon_name = „audio-card“
profiles:
output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <output:analog-stereo>
sinks:
alsa_output.platform-soc_sound.analog-stereo/#1: snd_rpi_hifiberry_dacplus Analog Stereo
sources:
alsa_output.platform-soc_sound.analog-stereo.monitor/#1: Monitor of snd_rpi_hifiberry_dacplus Analog Stereo
ports:
analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
properties: