Max2Play Home 2016 (en) › Forums › Max2Play on Raspberry PI › Network setup not working for PiZeroW with Hardwired Ethernet › Reply To: Network setup not working for PiZeroW with Hardwired Ethernet
First of all I have to say that we do recommend running the Squeezebox Server on a PiZero, let alone any other additional services with it.
The server unit should be a Pi 2B, 3B or 3B+, ideally. Depending on your library and your players, the Zero will most likely reach its limits.
Max2Play’s protocol for connection usually goes as follows:
– check ethernet
– check WPS
– establish access point
If your ethernet is not recognized, it’s either not fully configured within Max2Play or cannot reach your router.