Reply To: [UPDATE BUG FIX] Bluetooth Addon BETA

15. November 2018 at 20:19 #42073

Leider immer noch kein Erfolg. Weder mit dem Onboard Modul noch mit dem USB-Adapter von Logolink.
Habe auch mal 2 verschiedene Lautsprecher getestet, bei beiden das selbe Problem.

#### Bluetooth Installation ####

#### Bluetooth Dongle ####
hci0: Type: Primary Bus: USB
BD Address: 00:1A:7D:DA:71:12 ACL MTU: 310:10 SCO MTU: 64:8
UP RUNNING PSCAN
RX bytes:1854 acl:16 sco:0 events:112 errors:0
TX bytes:3194 acl:14 sco:0 commands:88 errors:0

#### DEVICE SoundCore Boost ####
[00:22:37:53:D5:38]
Name: SoundCore Boost
Alias: SoundCore Boost [rw]
Address: 00:22:37:53:D5:38
Icon: audio-card
Class: 0x240414
Paired: 1
Trusted: 1 [rw]
Blocked: 0 [rw]
Connected: 0
UUIDs: [AudioSink, AVRemoteControlTarget, AVRemoteControl, Handsfree, PnPInformation]

#### DEVICE EIVOTOR-b1_BLE ####
[C9:20:4C:9D:71:2C]
Name: EIVOTOR-b1_BLE
Alias: EIVOTOR-b1_BLE [rw]
Address: C9:20:4C:9D:71:2C
Icon: audio-card
Class: 0x240404
Paired: 1
Trusted: 1 [rw]
Blocked: 0 [rw]
Connected: 0
UUIDs: [SerialPort, AudioSink, AVRemoteControlTarget, AVRemoteControl]

#### BLUEALSA ERROR ####
● bluealsa.service – Start Bluealsa for Bluetooth on Alsa (not compatible with Pulseaudio)
Loaded: loaded (/etc/systemd/system/bluealsa.service; enabled; vendor preset: enabled)
Active: activating (auto-restart) (Result: exit-code) since Thu 2018-11-15 19:14:52 CET; 4s ago
Process: 2525 ExecStart=/usr/bin/bluealsa -p a2dp-sink -p a2dp-source (code=exited, status=127)
Process: 2522 ExecStartPre=/bin/sleep 2 (code=exited, status=0/SUCCESS)
Main PID: 2525 (code=exited, status=127)

Nov 15 19:14:52 Max2Play-Terrasse systemd[1]: bluealsa.service: Failed with result ‚exit-code‘.

#### BLUEALSA RUNNING ####
0