I burned the image on the microSD card and:
1. I did not take out the eMMC card
2. I inserted the micrSD card into the slot
3 I put the switch in the uSD position
4. The system has started
Then I disconnected the power and switched the switch to the eMMC position,
I did not take out the microSD card from the slot.
The system has started.
After removing the microSD card from the socket an error occurred
After inserting the microSD card into the socket – the system started.
It looks like the system starts from the microSD card even though the switch is in the eMMC position.
After entering the website of the server I get information that the system is installed on ODROID U3 and I have ODROID XU4
- This reply was modified 2 years, 8 months ago by Marcin.