Reply To: JustBoom Amp Hat wird nicht erkannt / is not recognized

Max2Play Home 2016 (en) Forums Max2Play on Raspberry PI JustBoom Amp Hat wird nicht erkannt / is not recognized Reply To: JustBoom Amp Hat wird nicht erkannt / is not recognized

22. August 2018 at 22:36 #37147

Hi Hiner,

I’ve just started with fresh install on class10 card.
On first boot chosen to my amp card and proceeded with reboot.
Upon reboot it loops on network time synchronization but as far as I can remember it was something to do with bad entry in config.txt (had to comment out justboomdac or something similar).
After successful boot I’ve activated my license – proceeded with updates to max2play (to 2.46), reboot, disabled build in audio, reboot (few actually due to that bug with network time sync). Upgraded kernel to 4.14, reboot, apt-get update/upgrade, got error – unable to get some packages – try –fix-missing (probably a mirror is down or something). Done apt-get update/upgrade manually, reboot.
Set ‚advanced‘ in JustBoom, and here’s the debug from squeezelite:

#### SQUEEZELITE VERSION ####
Squeezelite Max2Play v1.0.2 based on v1.8.4-726, Copyright 2012-2015 Adrian Smith, 2015-2016 Ralph Irving.
 

#### SQUEEZELITE BUILDOPTIONS ####
Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR GPIO DSD CONTROLSBS ALSASYNC BLUETOOTHSYNC
 

#### AUDIOPLAYER CONFIG ####
### Configuration of Audioplayers
SQUEEZELITE_PARAMETER=-o sysdefault:CARD=sndrpijustboomd -a 80:4:: -o hw:CARD=sndrpijustboomd -V Digital -Q
SQUEEZESLAVE_PARAMETER=-n plugequal
SHAIRPORT_PARAMETER=-d sysdefault:CARD=sndrpijustboomd -t hardware -m hw:CARD=sndrpijustboomd -c Digital
USE_USB_DAC=0
USE_EQUALIZER=0
SYSTEM_USER=pi
YMPD_PARAMETER=--webport 8081
 

#### SQUEEZELITE -l ####
Output devices:
  null                           - Discard all samples (playback) or generate zero samples (capture)
  equal                         
  plugequal                      - Equalizer for plughw:0,0
  default:CARD=sndrpijustboomd   - snd_rpi_justboom_dac,  - Default Audio Device
  sysdefault:CARD=sndrpijustboomd - snd_rpi_justboom_dac,  - Default Audio Device
  dmix:CARD=sndrpijustboomd,DEV=0 - snd_rpi_justboom_dac,  - Direct sample mixing device
  dsnoop:CARD=sndrpijustboomd,DEV=0 - snd_rpi_justboom_dac,  - Direct sample snooping device
  hw:CARD=sndrpijustboomd,DEV=0  - snd_rpi_justboom_dac,  - Direct hardware device without any conversions
  plughw:CARD=sndrpijustboomd,DEV=0 - snd_rpi_justboom_dac,  - Hardware device with all software conversions

 

#### SHAIRPORT (SYNC) VERSION ####
3.1.1-OpenSSL-Avahi-ALSA-soxr-sysconfdir:/usr/local/etc
 

#### OUTPUT SOUND DETAILS CARD 0 ####
access: MMAP_INTERLEAVED
format: S32_LE
subformat: STD
channels: 2
rate: 44100 (44100/1)
period_size: 882
buffer_size: 3528
 

#### OUTPUT SOUND DETAILS CARD 1 ####