Max2Play Home › Forums › Max2Play on Raspberry PI › JustBoom Amp Hat wird nicht erkannt / is not recognized › Reply To: JustBoom Amp Hat wird nicht erkannt / is not recognized
thanks for your support.
All topics you have listed, I have donebefore!
With a fresh flashed image (stretch) the device start with a hint to dhcp (row in start sequence).
Further, when all settings are done and a reboot is necessary the RPI crash: The RPI tried to start the network time synchro in an endless loop as descriped in my last post. My only chance is to switch off the device.
When I start the RPI after the crash manuel, at first the RPI reports a sdcard failure (three lines). After this the boot sequence runs normal.
BUT: I can’t choose in the Kodi settings my justboom, only hdmi and analogous, although I can see in the max2play web interface at the RPI settings that the justboom is set!!!
In the Kodi/XBMC tab „Autostart“ is set.
If I try to connect to the RPI via putty with the formaly known user and password the access will be denied. In the past it’s was possible!
Slowly I despair!!!!!