Reply To: [SOLVED] Amp2 – Bluetooth Streaming No Sound

Max2Play Home 2016 (en) Forums Max2Play on Raspberry PI [SOLVED] Amp2 – Bluetooth Streaming No Sound Reply To: [SOLVED] Amp2 – Bluetooth Streaming No Sound

8. Mai 2018 at 23:30 #35608

Strangely did my previous reply just disappear … hence here the details again.

Shairport & DNLA were both already disabled.

From the DEBUG I wonder if the following is simply incorrect as I disabled on-board sound?

BLUEALSA_PLAY_AUDIOCARD=hw:1,0

should actually be

BLUEALSA_PLAY_AUDIOCARD=hw:0,0

If so, how do I change this value as I have only one option on the bluetooth streaming section and this one is chosen:

sndrpihifiberry – hw:0:0 – Mixer Digital – HiFiBerry DAC+ HiFi pcm512x-hifi-0 []

Full DEBUG output below and again many thanks for your help!

#### SQUEEZELITE VERSION ####
Squeezelite Max2Play v1.0.2 based on v1.8.4-726, Copyright 2012-2015 Adrian Smith, 2015-2016 Ralph Irving.

#### SQUEEZELITE BUILDOPTIONS ####
Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR GPIO DSD CONTROLSBS ALSASYNC BLUETOOTHSYNC

#### AUDIOPLAYER CONFIG ####
### Configuration of Audioplayers
SQUEEZELITE_PARAMETER=-o sysdefault:CARD=sndrpihifiberry -a 80:4:: -o hw:0 -V Digital -C 5
SQUEEZESLAVE_PARAMETER=-n plugequal
SHAIRPORT_PARAMETER=-d default:CARD=sndrpihifiberry -t hardware -m hw:1 -c Digital
USE_USB_DAC=0
USE_EQUALIZER=0
SYSTEM_USER=pi
YMPD_PARAMETER=–webport 8081
BLUEALSA_PLAY_AUDIOCARD=hw:1,0
BLUEALSA_PLAY_MIXER=Digital

#### SQUEEZELITE -l ####
Output devices:
null – Discard all samples (playback) or generate zero samples (capture)
equal
plugequal – Equalizer for plughw:0,0
bluetooth – Your Bluetooth device 88:AD:D2:1C:C1:04
default:CARD=sndrpihifiberry – snd_rpi_hifiberry_dacplus, – Default Audio Device
sysdefault:CARD=sndrpihifiberry – snd_rpi_hifiberry_dacplus, – Default Audio Device
dmix:CARD=sndrpihifiberry,DEV=0 – snd_rpi_hifiberry_dacplus, – Direct sample mixing device
dsnoop:CARD=sndrpihifiberry,DEV=0 – snd_rpi_hifiberry_dacplus, – Direct sample snooping device
hw:CARD=sndrpihifiberry,DEV=0 – snd_rpi_hifiberry_dacplus, – Direct hardware device without any conversions
plughw:CARD=sndrpihifiberry,DEV=0 – snd_rpi_hifiberry_dacplus, – Hardware device with all software conversions

#### SHAIRPORT (SYNC) VERSION ####
3.1.1-OpenSSL-Avahi-ALSA-soxr-sysconfdir:/usr/local/etc

#### OUTPUT SOUND DETAILS CARD 0 ####
closed

#### OUTPUT SOUND DETAILS CARD 1 ####