Danged if I can get the ImageBurner plugin to work as m.max2play suggests:
utilise my NAS as backup target for all my Max2Play devices.
I have mounted the NAS backup destination directory apparently successfully (same way I mounted the NAS music directory which Squeezeserver sees OK).
I have put the mountpoint and a filename into the box at the bottom of the imageburner page (/mnt/Max2Play/Pi.img)
I get this:
Installation started – This Messages refreshes every 3 seconds to show current installation status. When finished this message disappears.
START creating Image to /home/pi/PiServer25-11-17.img
No valid Device choosen – must be sda or sdb
The destination in the message (/home/pi/PiServer25-11-17.img) is not what I put in the box (/mnt/Max2Play/PiServer25-11-17.img)
The flashing message keeps going and going till I refresh the webpage, when it is replaced by the message that the burn failed and the progressfile is being deleted.
The debug file contains
#### FILESYSTEMS SD-CARD ####
fdisk: cannot open /dev/: Is a directory
I am obviously missing something important. Any advice?