Reply To: Raspberry Pi 7'' Touch Display Bundle with IQaudIO no analog audio

16. Mai 2017 at 13:19 #28873

Thank you, Sir!

Yes, I followed the build instructions, and the unit worked well for more than a month. I went out of town, and I unplugged the unit while I was gone. When I returned, the unit wasn’t working, so I re-set it to factory settings, and re-did the software set-up from the beginning.

All works fine, except no analog audio output (the headphone jack works). Here is the audio debug information:

#### SQUEEZELITE VERSION ####
Squeezelite v1.8.4-726, Copyright 2012-2015 Adrian Smith, 2015-2016 Ralph Irving.

#### SQUEEZELITE BUILDOPTIONS ####
Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR GPIO DSD CONTROLSBS ALSASYNC BLUETOOTHSYNC

#### AUDIOPLAYER CONFIG ####
### Configuration of Audioplayers
SQUEEZELITE_PARAMETER=-o default:CARD=ALSA -a 120::16:
SQUEEZESLAVE_PARAMETER=-n plugequal
SHAIRPORT_PARAMETER=-d default:CARD=ALSA
USE_USB_DAC=0
USE_EQUALIZER=0
SYSTEM_USER=pi

#### SQUEEZELITE -l ####
Output devices:
null – Discard all samples (playback) or generate zero samples (capture)
equal
plugequal – Equalizer for plughw:0,0
default:CARD=ALSA – bcm2835 ALSA, bcm2835 ALSA – Default Audio Device
sysdefault:CARD=ALSA – bcm2835 ALSA, bcm2835 ALSA – Default Audio Device
dmix:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Direct sample mixing device
dmix:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Direct sample mixing device
dsnoop:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Direct sample snooping device
dsnoop:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Direct sample snooping device
hw:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Direct hardware device without any conversions
hw:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Direct hardware device without any conversions
plughw:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Hardware device with all software conversions
plughw:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Hardware device with all software conversions
default:CARD=IQaudIODAC – IQaudIODAC, – Default Audio Device
sysdefault:CARD=IQaudIODAC – IQaudIODAC, – Default Audio Device
dmix:CARD=IQaudIODAC,DEV=0 – IQaudIODAC, – Direct sample mixing device
dsnoop:CARD=IQaudIODAC,DEV=0 – IQaudIODAC, – Direct sample snooping device
hw:CARD=IQaudIODAC,DEV=0 – IQaudIODAC, – Direct hardware device without any conversions
plughw:CARD=IQaudIODAC,DEV=0 – IQaudIODAC, – Hardware device with all software conversions

#### SHAIRPORT VERSION ####
2.8.0-openssl-Avahi-ALSA-soxr

#### OUTPUT SOUND DETAILS CARD 0 ####
closed

#### OUTPUT SOUND DETAILS CARD 1 ####
closed