Reply To: [SOLVED] No sound from HiFiBerry Digi+ Pro (Max2Play "Squeezebox Touch" kit)

Max2Play Home 2016 (en) Forums Max2Play on Raspberry PI [SOLVED] No sound from HiFiBerry Digi+ Pro (Max2Play "Squeezebox Touch" kit) Reply To: [SOLVED] No sound from HiFiBerry Digi+ Pro (Max2Play "Squeezebox Touch" kit)

18. April 2017 at 0:40 #28297

Hello StigN, there’s really no much documentation needed for using a Hifiberry DAC in combination with a 7″ display. Choose your wanted player (OpenElec, Picoreplayer, Max2Play) and burn an image. Your config.txt file must contain the dtoverlay=hifiberry-digi and that’s it. Don’t remove any resistor! Your original RaspberryPi power supply is enough to feed.

The ledlight of a hifiberry starts burning when you use it for audio output.

I have my powersupply connected directly on the 7″display. Then it’s powered like your design directly on the Hifiberry DAC. I use a PicorePlayer image with Jivelite and a squeezbox server (very easy to install with picoreplayer.local on your browser and an ethernet connection on the Raspberry Pi).

If it doesn’t work just start again with a new image!