Reply To: Jivelite startet nicht.

Max2Play Home Forums Max2Play Add-ons Jivelite startet nicht. Reply To: Jivelite startet nicht.

17. Januar 2017 at 22:08 #26011

Hallo Christoph,

Max2Play ist aktuell, gerade nochmal geprüft.
Expandieren des Dateisystems funktioniert nicht mit folgender Fehlermeldung:
„Expandiere Dateisystem: mmcblk0p3
Kein Vergrößern des Dateisystems möglich. Keine gültige Partition zum expandieren gefunden.
Achte darauf, dass alle USB-Geräte und Speicherkarten getrennt sind und starte neu bevor das Dateisystem expandiert wird!“

DEBUG Informationen des Einstellungen/Reboot Menüs.:
#### FILESYSTEM ####
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 7351024 2125384 4883180 31% /
devtmpfs 437060 0 437060 0% /dev
tmpfs 441392 4 441388 1% /dev/shm
tmpfs 441392 6144 435248 2% /run
tmpfs 5120 4 5116 1% /run/lock
tmpfs 441392 0 441392 0% /sys/fs/cgroup
/dev/mmcblk0p1 61384 21472 39912 35% /boot

#### LOAD AVERAGE ####
0.47 0.22 0.08 1/138 1988

#### KERNEL ####
Linux Sqeezeplayer 4.4.14-v7+ #895 SMP Sun Jun 26 13:59:02 BST 2016 armv7l GNU/Linux

#### LINUX-VERSION ####
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 8.0 (jessie)
Release: 8.0
Codename: jessie

DEBUG Informationen des Audioplayer:
#### SQUEEZELITE VERSION ####
Squeezelite Max2Play v1.0.1 based on v1.8.4-726, Copyright 2012-2015 Adrian Smith, 2015-2016 Ralph Irving.

#### SQUEEZELITE BUILDOPTIONS ####
Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR GPIO DSD CONTROLSBS ALSASYNC BLUETOOTHSYNC

#### AUDIOPLAYER CONFIG ####
### Configuration of Audioplayers
SQUEEZELITE_PARAMETER=-o default:CARD=ALSA -a 120::: -v
SQUEEZESLAVE_PARAMETER=-n plugequal
SHAIRPORT_PARAMETER=-d default:CARD=ALSA
USE_USB_DAC=0
USE_EQUALIZER=0
SYSTEM_USER=pi
YMPD_PARAMETER=–webport 8081

#### SQUEEZELITE -l ####
Output devices:
null – Discard all samples (playback) or generate zero samples (capture)
equal
plugequal – Equalizer for plughw:0,0
default:CARD=ALSA – bcm2835 ALSA, bcm2835 ALSA – Default Audio Device
sysdefault:CARD=ALSA – bcm2835 ALSA, bcm2835 ALSA – Default Audio Device
dmix:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Direct sample mixing device
dmix:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Direct sample mixing device
dsnoop:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Direct sample snooping device
dsnoop:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Direct sample snooping device
hw:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Direct hardware device without any conversions
hw:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Direct hardware device without any conversions
plughw:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Hardware device with all software conversions
plughw:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Hardware device with all software conversions

#### SHAIRPORT VERSION ####
2.8.0-openssl-Avahi-ALSA-soxr

#### OUTPUT SOUND DETAILS CARD 0 ####
access: MMAP_INTERLEAVED
format: S16_LE
subformat: STD
channels: 2
rate: 44100 (44100/1)
period_size: 1324
buffer_size: 5296

#### OUTPUT SOUND DETAILS CARD 1 ####

Grüße
Marek