Reply To: [UPDATE BUG FIX] Bluetooth Addon BETA

Max2Play Home Forums Max2Play Add-ons [UPDATE BUG FIX] Bluetooth Addon BETA Reply To: [UPDATE BUG FIX] Bluetooth Addon BETA

3. Januar 2017 at 0:45 #25373

Hi

I checked the rsapberry settings and bluetooth was not disabled. I tried disbale, reboot, then ‚enable‘ by unticking and reboot again, but still the same. I also checked the Pi model and confirmed it is a Pi3 both via both Max2Play header and also using: cat /proc/cpuinfo – see output at bottom of this post. I also looked at the overlays in the config.txt file as this seems to be where bluetooth can be disabled. It is not obviously disabled via an overlay such as pi3-disable-bt-overlay but there is a Hifiberry overlay and I also found on another forum that someone had issues when they connected devices to GPIO but no answers received. Could the hifiberry dac+ on GPIO and the hifiberry overlay somehow disable bluetooth? I am only guessing and do not know how to check!

The below are the only uncommented items in config.txt: –

# Enable audio (loads snd_bcm2835)
dtparam=audio=on

# Enable audio (loads snd_bcm2835)
dtparam=audio=on
gpu_mem=128
dtoverlay=hifiberry-dacplus

Looking at hifiberry-dacplus, only documentation I can find is: –

Name: hifiberry-dacplus
Info: Configures the HifiBerry DAC+ audio card
Load: dtoverlay=hifiberry-dacplus,<param>=<val>
Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec
Digital volume control. Enable with
„dtoverlay=hifiberry-dacplus,24db_digital_gain“
(The default behaviour is that the Digital
volume control is limited to a maximum of
0dB. ie. it can attenuate but not provide
gain. For most users, this will be desired
as it will prevent clipping. By appending
the 24dB_digital_gain parameter, the Digital
volume control will allow up to 24dB of
gain. If this parameter is enabled, it is the
responsibility of the user to ensure that
the Digital volume control is set to a value
that does not result in clipping/distortion!)
slave Force DAC+ Pro into slave mode, using Pi as
master for bit clock and frame clock.

***Output of cat /proc/cpuinfo***

processor : 0
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4

processor : 1
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4

processor : 2
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4

processor : 3
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4

Hardware : BCM2709
Revision : a02082
Serial : 000000002217f0a7