Reply To: Rpi2 + Amp+ +M2P – no sound

Max2Play Home Forums Max2Play on Raspberry PI Rpi2 + Amp+ +M2P – no sound Reply To: Rpi2 + Amp+ +M2P – no sound

15. Dezember 2016 at 20:24 #24907

I found this under Raspberry Settings:

Enable High-Resolution Audio on HDMI
(set to default)
Activate 192Khz sample rate and 32Bit encoding for soundoutput through HDMI. Important: Set Alsa-Parameter for Squeezelite on page Audioplayer to „::16:0“ (fix bitrate to 16 and disable MMAP) if you get no sound at all or crackling sound!

Could this be applicable even if it is set to default?

Yes, MPD Player is playing. At least it was yesterday. Today I get this error:

Trying to launch … NOT successful Click here to show detailed information
/etc/init.d/mpd: 57: /etc/init.d/mpd: log_daemon_msg: not found
Check for running Kodi
Dec 15 19:22 : socket: Failed to bind to ‚[::]:6600‘: Address already in use
/etc/init.d/mpd: 87: /etc/init.d/mpd: log_end_msg: not found

This is after I stopped Squeezebox and Squeezelite and updated Max2Play.
Maybe I need to start again from scratch?! Is there a new version of Max2Play to download and re-image the SDcard?

thanks
Hilary