Reply To: [SOLVED] Volume Settings

Max2Play Home › Forums › Max2Play on Raspberry PI › [SOLVED] Volume Settings › Reply To: [SOLVED] Volume Settings

flysurfer Moderator
20. Juni 2016 at 11:12 #20743

Hi Rainer,

are there any errors when starting squeezelite? If squeezelite is shown as running in the Max2Play web interface and the audio stream seems to play fine you might try „-o hw:1 -V Digital“ as your HifiBerry Card might be the second audiocard, depending on the status of the InBuild-Audiocard of the RPi. If you deactivate the InBuild-Audiocard on Raspberry Pi Settings in Max2Play web interface, the „-o hw:0 -V Digital“ command will work.

All the Best,
Stefan