Reply To: use Behringer UCA-202 with Pi2 and M2P

Max2Play Home 2016 (en) Forums Max2Play on Raspberry PI use Behringer UCA-202 with Pi2 and M2P Reply To: use Behringer UCA-202 with Pi2 and M2P

14. September 2015 at 20:51 #15671

Hm.
Further up in the boot log, the linux system as such identifies it correctly as conencted to the USB port and treats it as “USB Audio codec”, more exaclty it lists says:

usb 1-1.3: new full-speed USB device number 4 using dwc/otg
usb 1-1.3: New USB device found, idVendor=o8bb, idProduct=2902
usb 1-1.3: Product: USB Audio Code
usb 1-1.3: Manufacturer: Burr-Brown from TI
input: Burr-Brwon from TI USB Audio codec as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.3
hid-generic 0003:08BB:2902.0001: input.hidraw0: USB HID v1.00 Device [Burr-Brown from TI

As mentioned before, the standard linux cores identify this USB device properly, how can I make it work with the M2P image?