Reply To: Direktes Booten von USB oder SSD ohne eingesteckte „Boot“ MicroSD auf Pi 3?

Max2Play Home › Forums › Max2Play on Raspberry PI › Direktes Booten von USB oder SSD ohne eingesteckte „Boot“ MicroSD auf Pi 3? › Reply To: Direktes Booten von USB oder SSD ohne eingesteckte „Boot“ MicroSD auf Pi 3?

14. Januar 2018 at 13:43 #33402

Hallo Heiner,

ich habe Teilerfolge beim Booten über USB (Stick) zu verzeichnen – müsste nun jetzt nur nochmal wissen, wo Ihr ggf. noch direkte/absolute Pfade auf die Micro SD Karte gesetzt habt (mmcblk0p1 und mmcblk0p2)??? – mein PI3B mit aus Eurem 7 Zoll Bundle kommt jetzt leider noch nicht ganz hoch gebootet – bereits umgestellt:

etc/fstab von:

proc /proc proc defaults 0 0
/dev/mmcblk0p1 /boot vfat defaults 0 2
/dev/mmcblk0p2 / ext4 defaults,noatime 0 1
# a swapfile is not a swap partition, no line here
# use dphys-swapfile swap[on|off] for that

##USERMOUNT

AUF:

proc /proc proc defaults 0 0
/dev/sda1 /boot vfat defaults 0 2
/dev/sda2 / ext4 defaults,noatime 0 1
# a swapfile is not a swap partition, no line here
# use dphys-swapfile swap[on|off] for that

##USERMOUNT

UND entsprechend in der cmdline.txt auf der boot-partition:

dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=/dev/sda2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait

Es ist etwas Pain in the A… für jedes Image-Backup die SD karte aus dem eigentlich tollen Bundle rausschrauben zu müssen… gerade jetzt wo auch noch Iobroker parallel darauf läuft – würde mich freuen, hier entsprechende Hnweise zur möglichen Anpassung zu bekommen. Booten über USB wäre echt klasse und hilfreich…

  • This reply was modified 8 years, 10 months ago by lemuba.