[SOLVED] Implementing hardware buttons and display (Pi Zero & pHats)

[randyMC]

randyMC

5. Februar 2017 at 11:33 #26676

Hi,

i planning to use the following pHat’s to create a standalone music player with max2play and a Raspberry Pi Zero:

Justboom DAC zero pHat
pisupply paPIrus pHat

for power supply, charge management and on/off i want to use the LiFePO4wered/Pi – shield

Therefor, i want to use the 5 hardware buttons of the papirus for
-jump folder fwd
-jump folder bck
-jump song fwd
-jump song bck
-play / pause
(these buttons are directly connected to 5 gpio pins)
-volume control is realized over the justboom encoder feature

main target is:
a headless, portable and easy-to-use music player without any use of a web interface or WiFi
with option to get the ePaper display working for song information.

I also need to:
-load the music player/playlist at startup
-autoload newly added albums to the playlist
-get a working SD-card for rPi Zero with 32-64gB

max2play is working on my Rpi zero quite good, so i want to use it for this project
Has anyone done something similar before?
How can i implement hardware buttons in max2play with python?

• This topic was modified 7 years, 2 months ago by randyMC.
• This topic was modified 7 years, 2 months ago by Mbydeen.

[Mbydeen]

Mbydeen

6. Februar 2017 at 15:29 #26694

Dear randyMC,

Please note that we do not support pisupply paPIrus pHat and LiFePO4wered/Pi – shield at the moment. Please post your quesion on Max2Play Projects and Builds Forum:

https://www.max2play.com/en/forums/forum/max2play-projects-and-builds/

and we will do our best to help in order to develop this project.

Best Regards,
Mohammad Mbydeen

• This reply was modified 7 years, 2 months ago by Mbydeen.

[randyMC]

randyMC

6. Februar 2017 at 22:28 #26704

Hi Mohammad,

thanks for the advice. I reposted the Thread in the projects section.
Please mention that this is not a support request for specific Hats.

I’m more interested in phyton libraries, scripts for the mpd which make it possible to implement hardware control
Thanks

[Mbydeen]

Mbydeen

13. Februar 2017 at 16:28 #26901

Dear randyMC,

Thank you to post it on the projects section.We will try to help you to develop this project.

Best Regards,
Mohammad Mbydeen