Reply To: [FIX IN BETA] Rotary Encoder Plugin with NEW IQAudio DigiAMP+

8. März 2019 at 2:40 #44710

Hi Heiner,

As per the IQAudio_v30 instruction manual, I am using:

GPIO23 (Pi Pin 16) – Encoder Pin 1 (right)
Ground (Pi Pin 14) – Encoder Center Pin, 2 (center)
GPIO24 (Pi Pin 18) – Encoder Pin 3 (left)

GPIO22 (Pin 15) – Is being used for Mute, which does work but not latched.

But the problem is the encoder SW is not running – TOP shows no additional process is spawned / no sign of IQ_rot.

Thanks,
Matt