Reply To: No sound on a WinBook Tw800.

9. September 2017 at 8:38 #31228

I reloaded this fresh and then installed Max2play. I can play on the monitor thought the HDMI or the built in little speakers on this Wintable tw801. Can even play though the headphone all on the desktop of it.

But can’t get Max2play to play.

This time I got it to list all the sound devices. by putting a link to /usr/bin/squeezelite at /opt/squeezelite if I don’t the Select Audio output stays blank.

Even put USB speakers on it. I can play that with the desktop too.

Here is all it shows for devices.

[email protected]:~# squeezelite -l
Output devices:
  null                           - Discard all samples (playback) or generate zero samples (capture)
  pulse                          - PulseAudio Sound Server
  equalUSB
  plugequalUSB                   - Equalizer for USB
  dmixerUSB                      - DMixer for USB
  plugdmixerUSB
  default:CARD=Audio             - Intel HDMI/DP LPE Audio, Intel HDMI/DP LPE Audio - Default Audio Device
  sysdefault:CARD=Audio          - Intel HDMI/DP LPE Audio, Intel HDMI/DP LPE Audio - Default Audio Device
  front:CARD=Audio,DEV=0         - Intel HDMI/DP LPE Audio, Intel HDMI/DP LPE Audio - Front speakers
  hdmi:CARD=Audio,DEV=0          - Intel HDMI/DP LPE Audio, Intel HDMI/DP LPE Audio - HDMI Audio Output
  dmix:CARD=Audio,DEV=0          - Intel HDMI/DP LPE Audio, Intel HDMI/DP LPE Audio - Direct sample mixing device
  dmix:CARD=Audio,DEV=1          - Intel HDMI/DP LPE Audio, Intel HDMI/DP LPE Audio - Direct sample mixing device
  dsnoop:CARD=Audio,DEV=0        - Intel HDMI/DP LPE Audio, Intel HDMI/DP LPE Audio - Direct sample snooping device
  dsnoop:CARD=Audio,DEV=1        - Intel HDMI/DP LPE Audio, Intel HDMI/DP LPE Audio - Direct sample snooping device
  hw:CARD=Audio,DEV=0            - Intel HDMI/DP LPE Audio, Intel HDMI/DP LPE Audio - Direct hardware device without any conversions
  hw:CARD=Audio,DEV=1            - Intel HDMI/DP LPE Audio, Intel HDMI/DP LPE Audio - Direct hardware device without any conversions
  plughw:CARD=Audio,DEV=0        - Intel HDMI/DP LPE Audio, Intel HDMI/DP LPE Audio - Hardware device with all software conversions
  plughw:CARD=Audio,DEV=1        - Intel HDMI/DP LPE Audio, Intel HDMI/DP LPE Audio - Hardware device with all software conversions
  default:CARD=DAC               - USB Audio DAC, USB Audio - Default Audio Device
  sysdefault:CARD=DAC            - USB Audio DAC, USB Audio - Default Audio Device
  front:CARD=DAC,DEV=0           - USB Audio DAC, USB Audio - Front speakers
  surround21:CARD=DAC,DEV=0      - USB Audio DAC, USB Audio - 2.1 Surround output to Front and Subwoofer speakers
  surround40:CARD=DAC,DEV=0      - USB Audio DAC, USB Audio - 4.0 Surround output to Front and Rear speakers
  surround41:CARD=DAC,DEV=0      - USB Audio DAC, USB Audio - 4.1 Surround output to Front, Rear and Subwoofer speakers
  surround50:CARD=DAC,DEV=0      - USB Audio DAC, USB Audio - 5.0 Surround output to Front, Center and Rear speakers
  surround51:CARD=DAC,DEV=0      - USB Audio DAC, USB Audio - 5.1 Surround output to Front, Center, Rear and Subwoofer speakers
  surround71:CARD=DAC,DEV=0      - USB Audio DAC, USB Audio - 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
  iec958:CARD=DAC,DEV=0          - USB Audio DAC, USB Audio - IEC958 (S/PDIF) Digital Audio Output
  dmix:CARD=DAC,DEV=0            - USB Audio DAC, USB Audio - Direct sample mixing device
  dsnoop:CARD=DAC,DEV=0          - USB Audio DAC, USB Audio - Direct sample snooping device
  hw:CARD=DAC,DEV=0              - USB Audio DAC, USB Audio - Direct hardware device without any conversions
  plughw:CARD=DAC,DEV=0          - USB Audio DAC, USB Audio - Hardware device with all software conversions
  default:CARD=bytcrrt5640       - bytcr-rt5640,  - Default Audio Device
  sysdefault:CARD=bytcrrt5640    - bytcr-rt5640,  - Default Audio Device
  dmix:CARD=bytcrrt5640,DEV=0    - bytcr-rt5640,  - Direct sample mixing device
  dmix:CARD=bytcrrt5640,DEV=1    - bytcr-rt5640,  - Direct sample mixing device
  dsnoop:CARD=bytcrrt5640,DEV=0  - bytcr-rt5640,  - Direct sample snooping device
  dsnoop:CARD=bytcrrt5640,DEV=1  - bytcr-rt5640,  - Direct sample snooping device
  hw:CARD=bytcrrt5640,DEV=0      - bytcr-rt5640,  - Direct hardware device without any conversions
  hw:CARD=bytcrrt5640,DEV=1      - bytcr-rt5640,  - Direct hardware device without any conversions
  plughw:CARD=bytcrrt5640,DEV=0  - bytcr-rt5640,  - Hardware device with all software conversions
  plughw:CARD=bytcrrt5640,DEV=1  - bytcr-rt5640,  - Hardware device with all software conversions

[email protected]:~#

I have picked about every one and it still says „Status: Squeezelite not running“ I can pick pulse and it don’t error then but it don’t play ether.

I know Max2play is not supported on this but so close.

I guess it has something to do with copying the squeezelite file to the /opt/squeezelite.

So my link looks like this that I guess my be the wrong way.

[email protected]:/opt/squeezelite# ls -l
total 8
-rwxrwxrwx 1 root root  462 Sep  9 08:02 btcheck.sh
drwxrwxrwx 2 root root 4096 Sep  9 06:39 log
lrwxrwxrwx 1 root root   20 Sep  9 07:12 squeezelite -> /usr/bin/squeezelite
[email protected]:/opt/squeezelite#

But if I don’t have that Max2play for setting Soundcard Select Audio output is blank just like this space in this text. As seen as I put that link it the Soundcard has a list to pick what card but it seems like none don’t work. I get this error.

T`rying to launch … NOT successful Click here to show detailed information
[09:12:51.215336] test_open:294 playback open error: No such device
[09:12:51.215483] output_init_common:381 unable to open output device`

Must be some easy fix. I can play on every device on the desktop.

-Raymond Day

  • This reply was modified 3 years, 7 months ago by  Raymond Day.