Max2Play Home › Forums › Max2Play on Raspberry PI › Allo Piano 2.1 Dual Mode › Reply To: Allo Piano 2.1 Dual Mode
Hi Heiner
Just a quick update for you …
– Beta-Update Max2Play under Settings/Reboot
Done
– Do a Kernel Upgrade in the Raspberry Settings menu (button at the bottom of the page)
Kernel Update started
Installation started - This Messages refreshes every 3 seconds to show current installation status. When finished this message disappears.
2017-08-09 21:38:56|
*** Raspberry Pi firmware updater by Hexxeh, enhanced by AndrewS and Dom
*** Performing self-update
*** Relaunching after update
*** Raspberry Pi firmware updater by Hexxeh, enhanced by AndrewS and Dom
#############################################################
This update bumps to rpi-4.9.y linux tree
Be aware there could be compatibility issues with some drivers
Discussion here:
https://www.raspberrypi.org/forums/viewtopic.php?f=29&t=167934
##############################################################
*** Downloading specific firmware revision (this will take a few minutes)
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 168 0 168 0 0 194 0 --:--:-- --:--:-- --:--:-- 194
0 54.0M 0 13058 0 0 8043 0 1:57:27 0:00:01 1:57:26 8043
2 54.0M 2 1188k 0 0 438k 0 0:02:06 0:00:02 0:02:04 1084k
10 54.0M 10 5602k 0 0 1550k 0 0:00:35 0:00:03 0:00:32 2810k
17 54.0M 17 9646k 0 0 2089k 0 0:00:26 0:00:04 0:00:22 3218k
23 54.0M 23 12.7M 0 0 2304k 0 0:00:24 0:00:05 0:00:19 3232k
29 54.0M 29 16.0M 0 0 2490k 0 0:00:22 0:00:06 0:00:16 3297k
36 54.0M 36 19.5M 0 0 2623k 0 0:00:21 0:00:07 0:00:14 3828k
42 54.0M 42 23.2M 0 0 2746k 0 0:00:20 0:00:08 0:00:12 3603k
48 54.0M 48 26.3M 0 0 2809k 0 0:00:19 0:00:09 0:00:10 3473k
54 54.0M 54 29.4M 0 0 2841k 0 0:00:19 0:00:10 0:00:09 3451k
60 54.0M 60 32.4M 0 0 2860k 0 0:00:19 0:00:11 0:00:08 3350k
61 54.0M 61 33.1M 0 0 1977k 0 0:00:27 0:00:17 0:00:10 1462k
69 54.0M 69 37.3M 0 0 2174k 0 0:00:25 0:00:17 0:00:08 1621k
75 54.0M 75 40.6M 0 0 2230k 0 0:00:24 0:00:18 0:00:06 1614k
78 54.0M 78 42.4M 0 0 2211k 0 0:00:25 0:00:19 0:00:06 1473k
82 54.0M 82 44.4M 0 0 2198k 0 0:00:25 0:00:20 0:00:05 1353k
85 54.0M 85 46.2M 0 0 2192k 0 0:00:25 0:00:21 0:00:04 3018k
88 54.0M 88 48.0M 0 0 2171k 0 0:00:25 0:00:22 0:00:03 2164k
91 54.0M 91 49.6M 0 0 2153k 0 0:00:25 0:00:23 0:00:02 1862k
95 54.0M 95 51.4M 0 0 2139k 0 0:00:25 0:00:24 0:00:01 1855k
96 54.0M 96 52.2M 0 0 2082k 0 0:00:26 0:00:25 0:00:01 1602k
100 54.0M 100 54.0M 0 0 2085k 0 0:00:26 0:00:26 --:--:-- 1616k
*** Updating firmware
*** Updating kernel modules
*** depmod 4.9.41+
*** depmod 4.9.41-v7+
*** Updating VideoCore libraries
*** Using HardFP libraries
*** Updating SDK
*** Running ldconfig
*** Storing current firmware revision
*** Deleting downloaded files
*** Syncing changes to disk
*** If no errors appeared, your firmware was successfully updated to b9becbbf3f48e39f719ca6785d23c53ee0cdbe49
*** A reboot is needed to activate the new firmware
Finished - Reboot needed! Click here to Reboot Now
Custom parameter Kernel removed
UPDATE ENDED - CHECK ABOVE LOG FOR ERRORS– The Kernel should now be Kernel 4.9.41 (you can check in Settings/Reboot in the Debug Info)
Yes, was
Linux max2play2 4.9.40-v7+ #1022 SMP Sun Jul 30 11:16:10 BST 2017 armv7l GNU/Linux
now have
Linux max2play2 4.9.41-v7+ #1023 SMP Tue Aug 8 16:00:15 BST 2017 armv7l GNU/Linux
– The beta updated Allo Plugin menu now has a „Master“ element to adjust the volume
Confirmed, looks ok .
– If you want to connect it to Squeezelite, you have to replace the -V Digital with -V Master in the commando line options of Squeezelite
Done.
Am now using this for squeeze lite
-C 10 -o hw:CARD=PianoDACPlus -V Master -a 80:4:: -R -u vLE:::28 -r 176400,192000 -D 80 -f /var/log/squeezeboxserver/squeezelite.log -d all=debug
And this for shairport
-t hardware -m hw:CARD=PianoDACPlus -c Master
alsamixer now shows the master
┌──────────────────────────────── AlsaMixer v1.0.28 ────────────────────────────────┐
│ Card: PianoDACPlus F1: Help │
│ Chip: F2: System information │
│ View: F3:[Playback] F4: Capture F5: All F6: Select sound card │
│ Item: Master [dB gain: -17.00, -17.00] Esc: Exit │
│ │
│ │
│ ┌──┐ ┌──┐ ┌──┐ │
│ │ │ │▒▒│ │ │ │
│ │ │ │▒▒│ │ │ │
│ │ │ │▒▒│ │ │ │
│ │ │ │▒▒│ │ │ →
│ │ │ │▒▒│ │ │ →
│ │ │ │▒▒│ │ │ →
│ │ │ │▒▒│ │ │ →
│ │▒▒│ │▒▒│ │ │ →
│ │▒▒│ │▒▒│ │ │ →
│ │▒▒│ │▒▒│ │ │ →
│ │▒▒│ │▒▒│ │ │ →
│ │▒▒│ │▒▒│ │ │ │
│ │▒▒│ │▒▒│ │ │ │
│ │▒▒│ │▒▒│ │ │ │
│ ├──┤ Low late └──┘ └──┘ ┌──┐ ┌──┐ 21ms 21ms 1s │
│ │OO│ │OO│ │OO│ │
│ └──┘ └──┘ └──┘ │
│ 52<>52 100<>100 0<>0 │
│< Master >DSP Prog Analogue Analogue Auto Mut Auto Mut Auto Mut Auto Mut Clock Mi │
│ │
│ │
└───────────────────────────────────────────────────────────────────────────────────┘
and …
┌──────────────────────────────── AlsaMixer v1.0.28 ────────────────────────────────┐
│ Card: PianoDACPlus F1: Help │
│ Chip: F2: System information │
│ View: F3:[Playback] F4: Capture F5: All F6: Select sound card │
│ Item: Volume Ramp Down Emergency Rate [1 sample/update] Esc: Exit │
│ │
│ │
│ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ │
│ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │
← │ │ │ │ │ │ │ │ │ │ →
← │ │ │ │ │ │ │ │ │ │ →
← │ │ │ │ │ │ │ │ │ │ →
← │ │ │ │ │ │ │ │ │ │ →
← │▒▒│ │ │ │ │ │ │ │▒▒│ →
← │▒▒│ │ │ │ │ │ │ │▒▒│ →
← │▒▒│ │ │ │ │ │ │ │▒▒│ →
← │▒▒│ │ │ │ │ │ │ │▒▒│ →
│ │▒▒│ │ │ │ │ │ │ │▒▒│ │
│ │▒▒│ │ │ │ │ │ │ │▒▒│ │
│ │▒▒│ │ │ │ │ │ │ │▒▒│ │
│ ├──┤ Dual-Mon 90 └──┘ └──┘ └──┘ ├──┤ None 1 sample │
│ │OM│ │MO│ │
│ └──┘ └──┘ │
│ 52 0 0 0 52<>52 │
│ Digital Dual Mod Lowpass Max Over Max Over Max Over Subwoofe Subwoofe<Volume R> │
│ │
│ │
└───────────────────────────────────────────────────────────────────────────────────┘And all tests OK…
So thank you so much … and just a FYI Dual Mono is great …. so just a quick thankyou too to the folks at Allo, am getting lots of enjoyment.