Reply To: Command line für IQAudiDAC + Rotary encoder

Max2Play Home › Forums › General Questions on Hardware and Max2Play Versions › Command line für IQAudiDAC + Rotary encoder › Reply To: Command line für IQAudiDAC + Rotary encoder

Werner premium
8. August 2017 at 16:37 #30496

Hallo Heiner

Leider keine guten Nachrichten. Keine Änderung

Update hab ich durchgeführt:

Update Squeezelite started
Dienst kann nicht gestoppt werden, da er nicht läuft
Installation gestartet – Diese Meldung zeigt den aktuellen Status der Installation aller 3 Sekunden an. Wenn diese abgeschlossen ist verschwindet die Meldung und der Server läuft.

cc -Wall -fPIC -s -O3 -march=armv6 -mfloat-abi=hard -mfpu=vfp -DRESAMPLE -DCONTROLSBS -DALSASYNC -DBLUETOOTHSYNC -DFFMPEG -DVISEXPORT -DDSD -DGPIO -DIR -I./include pcm.c -c -o pcm.o
cc -Wall -fPIC -s -O3 -march=armv6 -mfloat-abi=hard -mfpu=vfp -DRESAMPLE -DCONTROLSBS -DALSASYNC -DBLUETOOTHSYNC -DFFMPEG -DVISEXPORT -DDSD -DGPIO -DIR -I./include mad.c -c -o mad.o
cc -Wall -fPIC -s -O3 -march=armv6 -mfloat-abi=hard -mfpu=vfp -DRESAMPLE -DCONTROLSBS -DALSASYNC -DBLUETOOTHSYNC -DFFMPEG -DVISEXPORT -DDSD -DGPIO -DIR -I./include vorbis.c -c -o vorbis.o
cc -Wall -fPIC -s -O3 -march=armv6 -mfloat-abi=hard -mfpu=vfp -DRESAMPLE -DCONTROLSBS -DALSASYNC -DBLUETOOTHSYNC -DFFMPEG -DVISEXPORT -DDSD -DGPIO -DIR -I./include output_alsa.c -c -o output_alsa.o
cc -Wall -fPIC -s -O3 -march=armv6 -mfloat-abi=hard -mfpu=vfp -DRESAMPLE -DCONTROLSBS -DALSASYNC -DBLUETOOTHSYNC -DFFMPEG -DVISEXPORT -DDSD -DGPIO -DIR -I./include output.c -c -o output.o
cc -Wall -fPIC -s -O3 -march=armv6 -mfloat-abi=hard -mfpu=vfp -DRESAMPLE -DCONTROLSBS -DALSASYNC -DBLUETOOTHSYNC -DFFMPEG -DVISEXPORT -DDSD -DGPIO -DIR -I./include output_pa.c -c -o output_pa.o
cc -Wall -fPIC -s -O3 -march=armv6 -mfloat-abi=hard -mfpu=vfp -DRESAMPLE -DCONTROLSBS -DALSASYNC -DBLUETOOTHSYNC -DFFMPEG -DVISEXPORT -DDSD -DGPIO -DIR -I./include output_pack.c -c -o output_pack.o
cc -Wall -fPIC -s -O3 -march=armv6 -mfloat-abi=hard -mfpu=vfp -DRESAMPLE -DCONTROLSBS -DALSASYNC -DBLUETOOTHSYNC -DFFMPEG -DVISEXPORT -DDSD -DGPIO -DIR -I./include output_stdout.c -c -o output_stdout.o
cc -Wall -fPIC -s -O3 -march=armv6 -mfloat-abi=hard -mfpu=vfp -DRESAMPLE -DCONTROLSBS -DALSASYNC -DBLUETOOTHSYNC -DFFMPEG -DVISEXPORT -DDSD -DGPIO -DIR -I./include output_vis.c -c -o output_vis.o
cc -Wall -fPIC -s -O3 -march=armv6 -mfloat-abi=hard -mfpu=vfp -DRESAMPLE -DCONTROLSBS -DALSASYNC -DBLUETOOTHSYNC -DFFMPEG -DVISEXPORT -DDSD -DGPIO -DIR -I./include dop.c -c -o dop.o
cc -Wall -fPIC -s -O3 -march=armv6 -mfloat-abi=hard -mfpu=vfp -DRESAMPLE -DCONTROLSBS -DALSASYNC -DBLUETOOTHSYNC -DFFMPEG -DVISEXPORT -DDSD -DGPIO -DIR -I./include dsd.c -c -o dsd.o
cc -Wall -fPIC -s -O3 -march=armv6 -mfloat-abi=hard -mfpu=vfp -DRESAMPLE -DCONTROLSBS -DALSASYNC -DBLUETOOTHSYNC -DFFMPEG -DVISEXPORT -DDSD -DGPIO -DIR -I./include dsd2pcm/dsd2pcm.c -c -o dsd2pcm/dsd2pcm.o
cc -Wall -fPIC -s -O3 -march=armv6 -mfloat-abi=hard -mfpu=vfp -DRESAMPLE -DCONTROLSBS -DALSASYNC -DBLUETOOTHSYNC -DFFMPEG -DVISEXPORT -DDSD -DGPIO -DIR -I./include faad.c -c -o faad.o
cc -Wall -fPIC -s -O3 -march=armv6 -mfloat-abi=hard -mfpu=vfp -DRESAMPLE -DCONTROLSBS -DALSASYNC -DBLUETOOTHSYNC -DFFMPEG -DVISEXPORT -DDSD -DGPIO -DIR -I./include mpg.c -c -o mpg.o
cc -Wall -fPIC -s -O3 -march=armv6 -mfloat-abi=hard -mfpu=vfp -DRESAMPLE -DCONTROLSBS -DALSASYNC -DBLUETOOTHSYNC -DFFMPEG -DVISEXPORT -DDSD -DGPIO -DIR -I./include resample.c -c -o resample.o
cc -Wall -fPIC -s -O3 -march=armv6 -mfloat-abi=hard -mfpu=vfp -DRESAMPLE -DCONTROLSBS -DALSASYNC -DBLUETOOTHSYNC -DFFMPEG -DVISEXPORT -DDSD -DGPIO -DIR -I./include process.c -c -o process.o
cc -Wall -fPIC -s -O3 -march=armv6 -mfloat-abi=hard -mfpu=vfp -DRESAMPLE -DCONTROLSBS -DALSASYNC -DBLUETOOTHSYNC -DFFMPEG -DVISEXPORT -DDSD -DGPIO -DIR -I./include ffmpeg.c -c -o ffmpeg.o
cc -Wall -fPIC -s -O3 -march=armv6 -mfloat-abi=hard -mfpu=vfp -DRESAMPLE -DCONTROLSBS -DALSASYNC -DBLUETOOTHSYNC -DFFMPEG -DVISEXPORT -DDSD -DGPIO -DIR -I./include ir.c -c -o ir.o
Makefile.m2p:20: recipe for target ‚ir.o‘ failed
Finished Update Please Click here to Reboot Now!

Versucht zu starten … NICHT Erfolgreich Hier klicken für weitere Informationen

nach händisch durchgeführtem Reboot:

Versucht zu starten … NICHT Erfolgreich Hier klicken für weitere Informationen

Option error: -Q

Squeezelite v1.8, Copyright 2012-2015 Adrian Smith. See -t for license terms
Usage: /opt/squeezelite/squeezelite [options]
-s [:] Connect to specified server, otherwise uses autodiscovery to find server
-o Specify output device, default „default“, – = output to stdout
-l List output devices
-a :
:: Specify ALSA params to open output device, b = buffer time in ms or size in bytes, p = period count or size in bytes, f sample format (16|24|24_3|32), m = use mmap (0|1)
-a Specify sample format (16|24|32) of output file when using -o – to output samples to stdout (interleaved little endian only)
-b : Specify internal Stream and Output buffer sizes in Kbytes
-c , Restrict codecs to those specified, otherwise load all available codecs; known codecs: flac,pcm,mp3,ogg,aac,wma,alac,dsd (mad,mpg for specific mp3 codec)
-C Close output device when idle after timeout seconds, default is to keep it open while player is ‚on‘
-d = Set logging level, logs: all|slimproto|stream|decode|output, level: info|debug|sdebug
-e , Explicitly exclude native support of one or more codecs; known codecs: flac,pcm,mp3,ogg,aac,wma,alac,dsd (mad,mpg for specific mp3 codec)
-f Write debug to logfile
-m Set mac address, format: ab:cd:ef:12:34:56
-M Set the squeezelite player model name sent to the server (default: SqueezeLite)
-n Set the player name
-N Store player name in filename to allow server defined name changes to be shared between servers (not supported with -n)
-p Set real time priority of output thread (1-99)
-P Store the process id (PID) in filename
-r [:] Sample rates supported, allows output to be off when squeezelite is started; rates = |-|,,; delay = optional delay switching rates in ms
-R -u [params] Resample, params = ::::::,
recipe = (v|h|m|l|q)(L|I|M)(s) [E|X], E = exception – resample only if native rate not supported, X = async – resample to max rate for device, otherwise to max sync rate
flags = num in hex,
attenuation = attenuation in dB to apply (default is -1db if not explicitly set),
precision = number of bits precision (NB. HQ = 20. VHQ = 28),
passband_end = number in percent (0dB pt. bandwidth to preserve. nyquist = 100%),
stopband_start = number in percent (Aliasing/imaging control. > passband_end),
phase_response = 0-100 (0 = minimum / 50 = linear / 100 = maximum)
-D [delay] Output device supports DSD over PCM (DoP), delay = optional delay switching between PCM and DoP in ms
-v Visualiser support
-L List volume controls for output device
-U Unmute ALSA control and set to full volume (not supported with -V)
-V Use ALSA control for volume adjustment, otherwise use software volume adjustment
-z Daemonize
-t License terms
-? Display this help text

Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT DSD

Debug Info:

#### SQUEEZELITE VERSION ####
Squeezelite v1.8, Copyright 2012-2015 Adrian Smith.

#### SQUEEZELITE BUILDOPTIONS ####
Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT DSD

#### AUDIOPLAYER CONFIG ####
### Configuration of Audioplayers
SQUEEZELITE_PARAMETER=-o sysdefault:CARD=IQaudIODAC -a 80:4:: -o hw:CARD=IQaudIODAC -V Digital -Q
SHAIRPORT_PARAMETER=-d sysdefault:CARD=IQaudIODAC
USE_USB_DAC=0
USE_EQUALIZER=0
SYSTEM_USER=pi
GMEDIARENDER_ALSA_DEVICE=plug:plugequal

#### SQUEEZELITE -l ####
Output devices:
null – Discard all samples (playback) or generate zero samples (capture)
plugequal – Equalizer for plughw:0,0
default:CARD=IQaudIODAC – IQaudIODAC, – Default Audio Device
sysdefault:CARD=IQaudIODAC – IQaudIODAC, – Default Audio Device
default:CARD=ALSA – bcm2835 ALSA, bcm2835 ALSA – Default Audio Device
sysdefault:CARD=ALSA – bcm2835 ALSA, bcm2835 ALSA – Default Audio Device

#### SHAIRPORT VERSION ####
2.2.4-openssl-Avahi-ALSA-soxr

#### OUTPUT SOUND DETAILS CARD 0 ####
closed

#### OUTPUT SOUND DETAILS CARD 1 ####
closed

Max2play ist Up-to-date : kein Update möglich.

Wie soll ich weiter vorgehen – das Image neu aufspielen?
Für mich ist da auch keine neue Version von Squeezelite ersichtlich. Ist doch noch immer 1.8 oder sehe ich da was falsch?

lg Werner