Reply To: [SOLVED] RaspDAC OLED software won’t start in V2.43

6. Juli 2017 at 20:02 #29847

My configuration
Pi3 W/32GB PNY micro SDHC card. I-Sabre V3, rev 3 DAC.
Power supply is a lab grade linear, voltage set at 7.5V DC Current set to 3A max.
Display is wired straight accross. Display header pins (DAC) 1-6 straight to display via supplied 6 conductor

cable. Display header pins (DAC) 7-10 are open. Display header pins (DAC) 11-16 are wired straight

accross to the display via supplied 6 conductor cable.
Fresh down load of max2play Pi V2.43. Zip file tested for corruption, none found.
SDHC card formatted via SDFormatter V4.0, option format type=Full (overwrite).
Image written to card via Win32 Disk Imager for ODROID. copy reported good.
Booted Pi to expand memory, then entered registration info, booted to green „Activated“ code.
On Audiophonics page, chose I-Sabre V3 for installed audio card.
Squeezelite is running. Soundcard shown is „sysdefault-snd_rpi_hifiberry_dac“
Selected advanced install and completed same.
Selected „Power Button“ install. Completed same. Button working fine.
Selected „Display“ install…….. Below are screen copies of installation and failure.

Update Configfile – new Entry created

DISPLAY_AUTOSTART successfully added to autostart

Display Setup Started

Installation started – This Messages refreshes every 3 seconds to show current installation status. When

finished this message disappears.

—————————————-
Cleaning up…
Command /usr/bin/python -c „import setuptools, tokenize;__file__=’/tmp/pip-build-

imNGCF/regex/setup.py‘;exec(compile(getattr(tokenize, ‚open‘, open)(__file__).read().replace(‚\r\n‘, ‚\n‘),

__file__, ‚exec‘))“ install –record /tmp/pip-SahCXK-record/install-record.txt –single-version-externally-

managed –compile failed with error code 1 in /tmp/pip-build-imNGCF/regex
Storing debug log for failure in /root/.pip/pip.log
Downloading/unpacking pylms
Downloading pylms-1.0.tar.gz
Running setup.py (path:/tmp/pip-build-N_GGQG/pylms/setup.py) egg_info for package pylms

Installing collected packages: pylms
Running setup.py install for pylms
changing mode of build/scripts-2.7/pylms from 644 to 755

changing mode of /usr/local/bin/pylms to 755
Successfully installed pylms
Cleaning up…
Downloading/unpacking python-mpd2
Downloading python-mpd2-0.5.5.tar.gz
Running setup.py (path:/tmp/pip-build-IMGLIu/python-mpd2/setup.py) egg_info for package python-mpd2

Installing collected packages: python-mpd2
Running setup.py install for python-mpd2

Successfully installed python-mpd2
Cleaning up…
Set SERVER ADDRESS to
Use Interface eth0 with b8:27:eb:9a:cd:41
Set MAC ADDRESS to b8:27:eb:9a:cd:41
Activated Squeezebox Server in RaspDAC-Display
Finished – Reboot needed: Click here to Restart Device

This is the end of the first display install attempt on a virgin image of Pi 2.43

##############################################################################

Additional Settings for Audiophonics

Power Button
Display

Install and configure the Winstar OLED Display
The installer will automatically set all values for you. Choose the purpose of this player (Squeezebox /

MPD) before installing the display.

Display script NOT Running!
RE-Install Display Software

Autostart Display Manager:

Thanks to dhrone and the Github Repository https://github.com/dhrone/Raspdac-Display for sharing this

Display Manager!

This is the outcome of the 1st reboot after display install attempt.
############################################################################

Max2Play – Audiophonics Edition

Display Setup Started

Installation started – This Messages refreshes every 3 seconds to show current installation status. When

finished this message disappears.

Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en_GB
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en
Ign http://archive.raspberrypi.org jessie/ui Translation-en
Ign http://mirrordirector.raspbian.org jessie/rpi Translation-en_GB
Ign http://mirrordirector.raspbian.org jessie/rpi Translation-en
Reading package lists…
/opt /var/www/max2play/public
Delete Existing RaspDac-Display Folder
Cloning into ‚Raspdac-Display’…
/opt/Raspdac-Display /opt /var/www/max2play/public
Reading package lists…
Building dependency tree…
Reading state information…
python-pip is already the newest version.
python-setuptools is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 45 not upgraded.
Requirement already satisfied (use –upgrade to upgrade): moment in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied (use –upgrade to upgrade): dateparser>=0.6 in /usr/local/lib/python2.7/dist-

packages (from moment)
Requirement already satisfied (use –upgrade to upgrade): pytz>=2017.2 in /usr/local/lib/python2.7/dist-

packages (from moment)
Requirement already satisfied (use –upgrade to upgrade): times in /usr/local/lib/python2.7/dist-packages

(from moment)
Cleaning up…
Requirement already satisfied (use –upgrade to upgrade): pylms in /usr/local/lib/python2.7/dist-packages
Cleaning up…
Requirement already satisfied (use –upgrade to upgrade): python-mpd2 in /usr/local/lib/python2.7/dist-

packages
Cleaning up…
Set SERVER ADDRESS to
Use Interface eth0 with b8:27:eb:9a:cd:41
Set MAC ADDRESS to b8:27:eb:9a:cd:41
Activated Squeezebox Server in RaspDAC-Display
Finished – Reboot needed: Click here to Restart Device