Reply To: [SOLVED] Rotary encoder with IQaudIO Digi Amp

Max2Play Home › Forums › General Questions on Hardware and Max2Play Versions › [SOLVED] Rotary encoder with IQaudIO Digi Amp › Reply To: [SOLVED] Rotary encoder with IQaudIO Digi Amp

Tom premium
15. Mai 2017 at 13:17 #28847

Hi Mohammad,

green cable is connected to GPIO 25 (pin 4) now. The volume control is still not working 🙁 As GPIO25 is used for IR control, it doesn’t make sense to connect the switch between pin 2 and pin 4. But anyhow, let’s concentrate on the encoder and volume control. Do you agree the HW setting is ok? If yes, we should take a look on the software settings.

Here is the current configuration:
#### AUDIOPLAYER CONFIG ####
### Configuration of Audioplayers
SQUEEZELITE_PARAMETER=-o sysdefault:CARD=IQaudIODAC -a 80:4:: -o hw:CARD=IQaudIODAC -V Digital -Q
SQUEEZESLAVE_PARAMETER=-n plugequal
SHAIRPORT_PARAMETER=-d default:CARD=IQaudIODAC
USE_USB_DAC=0
USE_EQUALIZER=0
SYSTEM_USER=pi
YMPD_PARAMETER=–webport 8081
LMSIP=192.168.178.41

Best regards
TOM