Reply To: [SOLVED] Rotary encoder with IQaudIO Digi Amp

14. Mai 2017 at 23:39 #28838

Hi Mohammad,

thank you for your answer. But strange, because that’s exactly what I’ve done. Pin1(GPIO23) from P6 connector, which is the nearest to the chip, is connected to the left pin of the decoder(orange cable on my picture). Pin3(GPIO24) is connected to the right pin of the encoder(brown) and the mid pin of the encoder goes to pin8(0 V) via red cable. Sorry, but I don’t get what’s wrong…

Best regards