What Raspberry Pi do you use and what Max2Play SD-Card-Image did you install?
Raspi 3 mit integriertem Bluetooth
What Max2Play-Version do you use?
v2.42
What is the output of the “DEBUG” window at the bottom of the bluetooth addon?
#### Bluetooth Installation ####
#### Bluetooth Dongle ####
hci0: Type: BR/EDR Bus: UART
BD Address: B8:27:EB:25:22:FF ACL MTU: 1021:8 SCO MTU: 64:1
UP RUNNING PSCAN
RX bytes:5670 acl:60 sco:0 events:387 errors:0
TX bytes:425904 acl:557 sco:0 commands:73 errors:0
#### DEVICE D0-03-4B-32-6D-6A ####
[D0:03:4B:32:6D:6A]
Name: (null)
Alias: (null) [rw]
Address: (null)
Icon: (null)
Class: 0x0
Paired: 0
Trusted: 0 [rw]
Blocked: 0 [rw]
Connected: 0
UUIDs: [
#### DEVICE LS 1605 ####
[99:99:22:00:13:48]
Name: LS 1605
Alias: LS 1605 [rw]
Address: 99:99:22:00:13:48
Icon: audio-card
Class: 0x240404
Paired: 1
Trusted: 1 [rw]
Blocked: 0 [rw]
Connected: 1
UUIDs: [Headset, AudioSink, AVRemoteControlTarget, AdvancedAudioDistribution, AVRemoteControl, Handsfree]
#### PACMD LIST | grep active ####
active port: <analog-output>
active port: <analog-output>
active port: <headset-output>
active profile: <output:analog-stereo>
active profile: <output:analog-stereo>
active profile: <a2dp>
#### PACMD LIST | grep sink ####
Default sink name: bluez_sink.99_99_22_00_13_48
module.description = "When a bluetooth sink or source is added, load module-loopback"
module.description = "Automatically restore the default sink and source"
module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
name: <module-always-sink>
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.description = "When a sink/source is idle for too long, suspend it"
module.description = "Load filter sinks automatically when needed"
module.description = "BlueZ 5 Bluetooth audio sink and source"
3 sink(s) available.
name: <bluez_sink.99_99_22_00_13_48>
bluetooth.protocol = "a2dp_sink"
name: <bluez_sink.99_99_22_00_13_48.monitor>
sinks:
sinks:
sinks:
bluez_sink.99_99_22_00_13_48/#3: LS 1605
bluez_sink.99_99_22_00_13_48.monitor/#3: Monitor of LS 1605
0 sink input(s) available.
#### X-SERVER RUNNING ####
1
#### PULSEAUDIO RUNNING ####
1 S 1000 1266 1 0 80 0 - 28349 - ? 00:00:01 pulseaudio
1 S 1000 1363 1 0 80 0 - 478 - ? 00:00:00 start-pulseaudi
What exaclty is not working? Pairing, Connecting, Playing Audio, Reconnecting on Reboot,…
Pairing funktioniert.
Ich habe beim Audioplayer – PulseAudio eingestellt, höre jedoch keinen Ton am Speaker wenn ich vom LMS etwas abspiele,…
