Reply To: [UPDATE BUG FIX] Bluetooth Addon BETA

Max2Play Home Forums Max2Play Add-ons [UPDATE BUG FIX] Bluetooth Addon BETA Reply To: [UPDATE BUG FIX] Bluetooth Addon BETA

22. März 2017 at 12:08 #27828

Hi – sorry for the delayed answers:


@AxelS
: Ggf. war zum Zeitpunkt deiner Installation von Bluetooth der Raspbian Download-Server nicht erreichbar (hatten wir schon ein paar mal). Normalerweise müssen keine zusätzlichen Installationen durchgeführt werden.


@Kall
: I assume that you connect Bluetooth to the Squeezebox Server running on Max2Play and then stream to one of your Squeezeboxes. The normal delay should be in 3 to 5 seconds, as the stream is recorded on Max2Play and then send to the connected squeezeplayer. If you stream directly to the soundcard of the Max2Play device (Audioplayer set up with Pulse) you will have no delay but then you are restricted to the device (not using Squeezebox Server to share the stream). Anyway 30 seconds seems to much and you may try to restart the device (Max2Play) and see if that helps.


@treedweller
: after the first pairing from the Max2Play web interface (device is trusted and paired), the bluetooth device should be connected and also available for further connections on your smartphone, even if the connection drops. Can you check your smartphone and initiate the connection from your smartphone (open bluetooth settings and connect to Max2Play). When using the web interface to connect, it will trust & pair ( & maybe connect) -> disconnect -> connect again. When reloading the bluetooth page with the reload button on the web interface the connection should be indicated as green.


@Phil86
: Alexa (mit Lautsprecher) sollte mit Max2PLay Version 2.41 funktionieren als Bluetooth Lautsprecher (Pulse in Audioplayer als Soundkarte wählen). Der Dot kann als Bluetooth-Zuspieler für Max2Play verwendet werden (Streaming über Soundkarte oder Squeezebox Server).


@TerryK
: Das Pairing muss bei Max2Play nur einmal über das Webinterface gestartet werden. Danach funktioniert es ohne das Webinterface.
Die BT Class-ID wird automatisch gesetzt bei der Erkennung des Device. Allerdings kann es durchaus sein, dass einige Eigenschaften nicht richtig erkannt werden.

All the Best,
Stefan