Reply To: Bluetooth Addon BETA

Max2Play Home 2016 (en) Forums Max2Play Add-ons Bluetooth Addon BETA Reply To: Bluetooth Addon BETA

1. February 2017 at 21:42 #26551

I had forgotten about updating to beta. However, I had listed the cards to ensure that I was using the correct index.

Tonight I did the update to beta and tried again without success. After rebooting again, the command started working without error. Unfortunately, it didn’t fix the problem and I’m still getting silence out of my Echo.

Just to check I did connect my Galaxy S6 to it and managed to play music using VLC.

pi@AlexaTest:~ $ pacmd list-cards
3 card(s) available.                                                                                       
    index: 0
        name: <alsa_card.usb-C-Media_Electronics_Inc._USB_PnP_Sound_Device-00-Device>
        driver: <module-alsa-card.c>
        owner module: 6
        properties:
                alsa.card = "1"
                alsa.card_name = "USB PnP Sound Device"
                alsa.long_card_name = "C-Media Electronics Inc. USB PnP Sound Device at usb-3f980000.usb-1.4, full spe"
                alsa.driver_name = "snd_usb_audio"
                device.bus_path = "platform-3f980000.usb-usb-0:1.4:1.0"
                sysfs.path = "/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/sound/card1"
                udev.id = "usb-C-Media_Electronics_Inc._USB_PnP_Sound_Device-00-Device"
                device.bus = "usb"
                device.vendor.id = "0d8c"
                device.vendor.name = "C-Media Electronics, Inc."
                device.product.id = "013c"
                device.product.name = "CM108 Audio Controller"
                device.serial = "C-Media_Electronics_Inc._USB_PnP_Sound_Device"
                device.string = "1"
                device.description = "CM108 Audio Controller"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-usb"
        profiles:
                input:analog-mono: Analog Mono Input (priority 1, available: unknown)
                off: Off (priority 0, available: unknown)
        active profile: <input:analog-mono>
        sources:
                alsa_input.usb-C-Media_Electronics_Inc._USB_PnP_Sound_Device-00-Device.analog-mono/#0: CM108 Audio Controller Analog Mono
        ports:
                analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "audio-input-microphone"
    index: 1
        name: <alsa_card.0>
        driver: <module-alsa-card.c>
        owner module: 7
        properties:
                alsa.card = "0"
                alsa.card_name = "bcm2835 ALSA"
                alsa.long_card_name = "bcm2835 ALSA"
                device.bus_path = "/devices/virtual/sound/card0"
                sysfs.path = "/devices/virtual/sound/card0"
                device.string = "0"
                device.description = "bcm2835 ALSA"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card"
        profiles:
                output:analog-mono: Analog Mono Output (priority 100, available: unknown)
                output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
                off: Off (priority 0, available: unknown)
        active profile: <output:analog-stereo>
        sinks:
                alsa_output.0.analog-stereo/#0: bcm2835 ALSA Analog Stereo
        sources:
                alsa_output.0.analog-stereo.monitor/#1: Monitor of bcm2835 ALSA Analog Stereo
        ports:
                analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
                        properties:

    index: 2
        name: <bluez_card.88_71_E5_7F_B8_D1>
        driver: <module-bluez5-device.c>
        owner module: 28
        properties:
                device.description = "Echo-0NQ"
                device.string = "88:71:E5:7F:B8:D1"
                device.api = "bluez"
                device.class = "sound"
                device.bus = "bluetooth"
                device.form_factor = "speaker"
                bluez.path = "/org/bluez/hci0/dev_88_71_E5_7F_B8_D1"
                bluez.class = "0x2c0414"
                bluez.alias = "Echo-0NQ"
                device.icon_name = "audio-speakers-bluetooth"
        profiles:
                a2dp_source: High Fidelity Capture (A2DP Source) (priority 10, available: unknown)
                a2dp: High Fidelity Playback (A2DP Sink) (priority 10, available: unknown)
                off: Off (priority 0, available: yes)
        active profile: <a2dp>
        sinks:
                bluez_sink.88_71_E5_7F_B8_D1/#1: Echo-0NQ
        sources:
                bluez_sink.88_71_E5_7F_B8_D1.monitor/#2: Monitor of Echo-0NQ
        ports:
                speaker-output: Speaker (priority 0, latency offset 0 usec, available: unknown)
                        properties:

                speaker-input: Bluetooth Input (priority 0, latency offset 0 usec, available: no)
                        properties:

pi@AlexaTest:~ $ pacmd set-card-profile 2 a2dp 
pi@AlexaTest:~ $