Reply To: [UPDATE BUG FIX] Bluetooth Addon BETA

23. November 2016 at 12:35 #24124

Hi
I would like to stream Musik from my Phone via BT to my Raspberry Pi2
I have
m2play Version 2.38
Raspberry PI 2
jessie image installed
old Mumbi BT Dongle.
The Pi recognizes my Android Phone but the phone does not find the Pi – ergo no pairing and streaming possible. If I put the soundcard settings to „pulse“ there is no sound.
Any suggestions?
Thanks,
Stefan

DEBUG settings:
#### FILESYSTEM ####
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 7351024 1958204 5069528 28% /
devtmpfs 437060 0 437060 0% /dev
tmpfs 441396 476 440920 1% /dev/shm
tmpfs 441396 6244 435152 2% /run
tmpfs 5120 4 5116 1% /run/lock
tmpfs 441396 0 441396 0% /sys/fs/cgroup
/dev/mmcblk0p1 61384 21472 39912 35% /boot
tmpfs 88280 8 88272 1% /run/user/1000

#### LOAD AVERAGE ####
0.24 0.20 0.18 1/201 10341

#### KERNEL ####
Linux Gaeste 4.4.14-v7+ #895 SMP Sun Jun 26 13:59:02 BST 2016 armv7l GNU/Linux

#### LINUX-VERSION ####
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 8.0 (jessie)
Release: 8.0
Codename: jessie

DEBUG Bluetooth:
#### Bluetooth Installation ####

#### Bluetooth Dongle ####
hci0: Type: BR/EDR Bus: USB
BD Address: 00:15:83:15:A3:10 ACL MTU: 672:3 SCO MTU: 128:2
UP RUNNING PSCAN
RX bytes:2996 acl:13 sco:0 events:89 errors:0
TX bytes:1111 acl:11 sco:0 commands:55 errors:0

#### DEVICE (SM-G901F) ####
[84:55:A5:E0:4E:B8]
Name: (SM-G901F)
Alias: (SM-G901F) [rw]
Address: 84:55:A5:E0:4E:B8
Icon: phone
Class: 0x5a020c
Paired: 0
Trusted: 1 [rw]
Blocked: 0 [rw]
Connected: 0
UUIDs: [SerialPort, OBEXObjectPush, AudioSource, AVRemoteControlTarget, HeadsetAudioGateway, PANU, NAP, HandsfreeAudioGateway, 0000112d-0000-1000-8000-00805f9b34fb, PhoneBookAccess, 00001132-0000-1000-8000-00805f9b34fb, PnPInformation, 00001800-0000-1000-8000-00805f9b34fb, 00001801-0000-1000-8000-00805f9b34fb]

#### PACMD LIST | grep active ####
active port: <analog-output>
active profile: <output:analog-stereo>

#### PACMD LIST | grep sink ####
Default sink name: alsa_output.0.analog-stereo
module.description = „When a bluetooth sink or source is added, load module-loopback“
module.description = „Automatically restore the default sink and source“
module.description = „When a sink/source is removed, try to move its streams to the default sink/source“
name: <module-always-sink>
module.description = „When a sink/source is idle for too long, suspend it“
module.description = „Load filter sinks automatically when needed“
1 sink(s) available.
sinks:
1 sink input(s) available.
sink: 0 <alsa_output.0.analog-stereo>
module-stream-restore.id = „sink-input-by-application-name:ALSA plug-in [squeezelite]“

#### X-SERVER RUNNING ####
1

#### PULSEAUDIO RUNNING ####
1 R 1000 1110 1 4 80 0 – 39787 – ? 00:01:41 pulseaudio
1 S 1000 1199 1 0 80 0 – 478 – ? 00:00:00 start-pulseaudi