Reply To: Wlan adapter LOGILINK WL0238

5. May 2016 at 13:50 #20059

hi

Web interface is ok! it works with the internal IP-Address
all updates and further change I could provided
but not the WLAN!

WiFi & Network configuration
Data saved
Status: WiFi USB adapter status is active. WiFi connection status is active (IP: NO IP! No connection!)

this after “reboot”

Debug: Saving WPA-Supplicant (Line 12: unknown global field ‘ssid=”UPC0050309″‘. Line 12: Invalid configuration line ‘ssid=”UPC0050309″‘. Line 13: unknown global field ‘scan_ssid=1’. Line 13: Invalid configuration line ‘scan_ssid=1’. Line 14: unknown global field ‘proto=RSN’. Line 14: Invalid configuration line ‘proto=RSN’. Line 15: unknown global field ‘key_mgmt=WPA-PSK’. Line 15: Invalid configuration line ‘key_mgmt=WPA-PSK’. Line 16: unknown global field ‘pairwise=CCMP TKIP’. Line 16: Invalid configuration line ‘pairwise=CCMP TKIP’. Line 17: unknown global field ‘group=CCMP TKIP’. Line 17: Invalid configuration line ‘group=CCMP TKIP’. Line 18: unknown global field ‘psk=”IAAGSQQQ”‘. Line 18: Invalid configuration line ‘psk=”IAAGSQQQ”‘. Line 25: invalid key_mgmt ‘WPA2-PSK’ Line 25: no key_mgmt values configured. Line 25: failed to parse key_mgmt ‘WPA2-PSK’. Line 29: failed to parse network block. Failed to read or parse configuration ‘/opt/max2play/wpa_supplicant.conf’. Reloading /etc/samba/smb.conf: smbd only. )
WLAN activated – please reboot device
Data saved

always the same debug-Info after setting the new ssid and WPA-Key

  • This reply was modified 1 year, 5 months ago by  Max Müller.