Sliders and Volume Control

Max2Play Home Forums Max2Play on Raspberry PI Sliders and Volume Control

Viewing 2 posts - 1 through 2 (of 2 total)
  • 8. März 2017 at 0:22 #27502

    Dear m2p Team,
    I am very satisfied with your good work but I have a small problem:
    I have installed two Hifiberry boards with m2p: a DAC+ and a DAC+ pro.
    Both should be driven with 96% volume output.
    When I set the slider in the Raspberry control Window at 96% and safe this setting, the slider on the Hifibery control window goes up to 99%.
    And if I set the slider on the Hifiberry control window to 96%, its 86% at the Raspberry control window. What went wrong?

    9. März 2017 at 15:04 #27528

    Hi thomashilger

    There was a problem in mapping the volume form Logarithmic to linear, it was only in HiFiberry plugin, we have fixed the problem. You can update the image to the Beta version and see the difference.

    Regards,
    Mohamamd Mbydeen

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Register here