[SOLVED] Problem setting volume in YMPD

Max2Play Home Forums Max2Play on Raspberry PI [SOLVED] Problem setting volume in YMPD

Viewing 2 posts - 1 through 2 (of 2 total)
  • 29. Mai 2017 at 16:31 #29102

    Hello !

    I’ve just started with max2play on a Raspberry PI 3, with a HifiBerry Amp+ card.

    I can not set volume from YMPD. When I change the volumne, a pop-up toggles with „Problems setting volume“ message.
    I can set the volume from Raspberry Parameters tab, on AudioCard panel, it works perfectly.
    I have no idea where to look at.

    Any help will be much appreciated.

    Best regards,
    Christophe

    Here is my debug info on MPD tab :
    #### MPD Version ####
    Version: 0.19.1-1.1

    #### AUDIO-DEVICES (aplay -L) ####
    null
    Discard all samples (playback) or generate zero samples (capture)
    equal
    plugequal
    Equalizer for plughw:0,0
    default:CARD=sndrpihifiberry
    snd_rpi_hifiberry_amp,
    Default Audio Device
    sysdefault:CARD=sndrpihifiberry
    snd_rpi_hifiberry_amp,
    Default Audio Device
    dmix:CARD=sndrpihifiberry,DEV=0
    snd_rpi_hifiberry_amp,
    Direct sample mixing device
    dsnoop:CARD=sndrpihifiberry,DEV=0
    snd_rpi_hifiberry_amp,
    Direct sample snooping device
    hw:CARD=sndrpihifiberry,DEV=0
    snd_rpi_hifiberry_amp,
    Direct hardware device without any conversions
    plughw:CARD=sndrpihifiberry,DEV=0
    snd_rpi_hifiberry_amp,
    Hardware device with all software conversions

    • This topic was modified 6 years, 10 months ago by C.Marchand. Reason: Problem solved
    31. Mai 2017 at 21:28 #29150

    Problem solved. /var/log/mpd/mpd.log contains explicit message on problem. I had mis-written mixing thing, with hw0 instead of hw:0.

    Maybe a possibility to inspect log files from web interface could facilitate things…

    Best regards,
    Christophe

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Register here