Keine Aktivierung oder Update auf Ordroid XU3 mit Max2Play 2.42

Max2Play Home Forums Max2Play on ODROID U3/C1 Keine Aktivierung oder Update auf Ordroid XU3 mit Max2Play 2.42

Viewing 8 posts - 1 through 8 (of 8 total)
  • 20. Mai 2017 at 8:22 #28960

    Hallo,

    meine Lizenz sollte eigentlich bis 2018 laufen, aber letztens kam die „Nicht aktiviert“-Warnung. Ich habe noch eine dreimonatige Testlizenz, gültig bis 31.08.2017, deren Eingabe liefert aber die selbe Fehlermeldung wie bei Neueingabe meiner Mailadresse:
    „Deine Lizenz konnte leider nicht bestätigt werden. Hast du die richtige Mailadresse eingegeben, die auch im Shop von Max2Play genutzt wurde? Falls du einen Aktivierungscode eingegeben hast, prüfe bitte nochmal die genaue Schreibweise.“
    Mein XU3 läuft noch nicht mit Jessie, sondern mit Vivid Vervet, falls das ein Grund sein sollte.

    Danke und Ciao,

    Martin

    Edit:
    Soeben eine Raspberry Pi 3 aus dem Fundus mit Max2Play 2.42 versorgt und dort funktioniert die Lizenz per Email-Adresse. Läuft 2018-04-05 aus.

    • This topic was modified 6 years, 10 months ago by Ajax.
    • This topic was modified 6 years, 10 months ago by Ajax.
    22. Mai 2017 at 10:59 #28982

    Hallo Martin,

    Bitte versuche ein frisches XU4-Image von unserer Webseite runterzuladen und mit dem Odroid Windiskimager zu brennen.

    Max2Play Image Download


    http://com.odroid.com/sigong/blog/blog_list.php?bid=144

    22. Mai 2017 at 19:09 #29008

    Hallo Heiner,

    werde ich machen, komme aber erst am Donnerstag dazu. Nachdem der Kleine mein Infrastrukturserver geworden ist (NFS, AFP, SAMBA, NTP, DNS,…), ist eine Umstellung etwas umfangreicher… Drum habe ich mich auch bisher davor gedrückt. Ich nehme an, ein „dd if=… of=/dev/sd… bs=4M“ tuts auch.

    Bei der Gelegenheit: Ich habe vor kurzem mein Netzwerk (mal wieder) auf Dual Stack IPv4 und IPv6 umgestellt. Ist Max2Play mit IPv6 ein mögliches Problem?

    Ich melde mich dann wieder, wenn ich das neue Image verwendet habe.

    Ciao,

    Martin

    • This reply was modified 6 years, 10 months ago by Ajax.
    25. Mai 2017 at 10:23 #29062

    Hallo nochmal,

    ich habe meine EMMC entfernt und eine microSD mit dem obigen Image laufen lassen. Damit funktioniert die Aktivierung wieder, auch das Update ging. Das Image lieferte Max2Play 2.34 und ging brav auf 2.43. Allein meine USB-Platten wurden nicht erkannt, nicht mal eine Meldung in dmesg erschien, wenn ich sie angeschlossen habe, angezeigte Kernelversion war Version 3.10.96 nach apt-get update und apt-get distupgrade. Nach ein paar Versuchen habe ich meine EMMC mit dem alten System wieder gesteckt und nun läuft wieder alles ohne Aktivierung. Ich werde einfach damit leben, bis der Updatedruck zu groß geworden ist.

    Ciao,

    Martin

    PS: Es ist tatsächlich ein XU4.

    9. Juni 2017 at 4:27 #29434

    Hello,
    I’m not German, so i’m sorry i can not read Deutch langage, i’m not english to, but i learn this langage as international langage, so i hope we can communicate in english here.
    I need some help for install max2play on odroid-xu4 device.
    I do download image for this device here, then download win32diskImage windows application, install it on a windows 7 OS, then unzip iage file downloaded, then write it on eMMC card (through the micro-sd adaptator and an SD adaptator linked together). Ok, the image has been burnt.
    Then i do put eMMC card on Odroid-xu4 borad, switch on eMMC boot (switcher on borad)… power on and… nothing.
    I connect HDMI (no image, but maybe there is no graphic driver), then i try to connect through ssh on LAN ip (no ssh server i think), then try to connect on webrowser http:192.168.1.47 (that is the normal ip for this mac adress, i look that on my box)… nothing.
    I look at the device and there is no blue color light blink on board (that led normally blink on blue color whern boot has been correct).
    I think that just simply write image from win32diskImage doesn’t work or is not suffisant.
    Could you please help me (and i think some other who will be in the same situation than me) ?
    (in english)
    thank you

    • This reply was modified 6 years, 9 months ago by jerome___.
    9. Juni 2017 at 8:16 #29438

    instead of edi my post, i choose to add a new one.
    I resolve my problem. My eMMC card was corrupted, then i had to gone here: http://ameridroid.com/p/faq
    for find odroid-xu3/4 recovery proceed:
    download the android-4.4 file provide by ameridroid and follow the step: install it on micro-SD card, then plug micro-SD and eMMC together inside odroid-xu4 board in place with switcher to SD-boot position, then waiting to have the blue light OFF… the tie for have android-4.34 installed on eMMC and by the way, correct something in the boot mechanism who can not be accessed by dd application.
    After that, can put images on eMMC drive… i choosed to use dd because for me linux is more clear than windows things.
    All goes right after that, i can see mate desktop on HDMI connected screen and i will go to install kodi and NFS/sFTP/SMB shared servers, then CEC-HDMI things for Kodi to be able to use remote control from TV compatible CEC by USB connection on Odroid board, through UDMI cable.

    thank you for your help and hope this should help other users who will have the same problem than me.
    Have a good day (maybe someone will translate in german langage, i can also translate in french if you need; just tell me).

    12. Juni 2017 at 11:52 #29503

    Hi jerome,

    English is actually preferred. However, since we are from Germany, we can answer German requests as well and help some people that are not as fluid in English. Sorry about the inconvenience.

    I’m happy you resolved your issue. However, you do not need to enter the desktop or the SSH for Max2Play. Everything is controlled from the web interface. Just type „max2play/“ in any browser in your local network and you can make alls necessary configurations. Kodi is preinstalled and so are some audio players. We also have a SambaShares plugin for network shares and an easy mouting feature.

    12. Juni 2017 at 15:07 #29522

    if i wasn’t able to go inside by ssh, i would not be able to see that in fact, some services failed to start (first). Second, for be sure what max2play does, i have to look inside the config files (right ?) it is a necessary control i think, because sometimes, there is problems, and terminal emulator can do what web UI can not.
    So… actually, as i told you, 3 services failed on start, directly (i post something on that).

    Aussi, comme les Allemands et les Français ont une histoire commune (certes gênante), peut être aussi parlez vous Français ? Mais je pense que le simple fait de poster sur un forum publique entraine que nous parlions pour tout le monde (donc dans un langage connu de la majorité… donc ni le français, ni l’allemand).

    Bonne continuation and good luck.

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.

Register here