[SOLVED] HiFiBerry DAC + stopped working

Max2Play Home Forums Max2Play on Raspberry PI [SOLVED] HiFiBerry DAC + stopped working

Viewing 17 posts - 1 through 17 (of 17 total)
  • 20. Februar 2017 at 18:12 #27053

    Hi all,

    In the last few days my HiFi Berry DAC+ on my RPI 3 has stopped working :-(.

    In an effort to get things working again I have gone back to a stock Max2Play image (241, previously on beta) and updated kernel, and packages ; however the card does not seem to be recognised.

     aplay -l
    aplay: device_list:268: no soundcards found...

    If I change the installed card in the HiFi Berry configuration to HiFi Berry DAC+ Light it is recognised, however I have no audio output.

    aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: sndrpihifiberry [snd_rpi_hifiberry_dac], device 0: HifiBerry DAC HiFi pcm5102a-hifi-0 []
      Subdevices: 0/1
      Subdevice #0: subdevice #0
    

    Thanks in advance for your help,

    Ben

    20. Februar 2017 at 18:22 #27054

    I have enabled dtdebug in by boot config as suggested in https://support.hifiberry.com/hc/en-us/articles/205377651-Configuring-Linux-4-x-or-higher and the output of dmesg is

    [    0.000000] Booting Linux on physical CPU 0x0
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Initializing cgroup subsys cpuacct
    [    0.000000] Linux version 4.4.49-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #968 SMP Fri Feb 17 14:22:28 GMT 2017
    [    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
    [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    [    0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
    [    0.000000] cma: Reserved 8 MiB at 0x36800000
    [    0.000000] Memory policy: Data cache writealloc
    [    0.000000] On node 0 totalpages: 225280
    [    0.000000] free_area_init_node: node 0, pgdat 808c5040, node_mem_map b6036000
    [    0.000000]   Normal zone: 1980 pages used for memmap
    [    0.000000]   Normal zone: 0 pages reserved
    [    0.000000]   Normal zone: 225280 pages, LIFO batch:31
    [    0.000000] [bcm2709_smp_init_cpus] enter (9520->f3003010)
    [    0.000000] [bcm2709_smp_init_cpus] ncores=4
    [    0.000000] PERCPU: Embedded 13 pages/cpu @b5ff1000 s22592 r8192 d22464 u53248
    [    0.000000] pcpu-alloc: s22592 r8192 d22464 u53248 alloc=13*4096
    [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 223300
    [    0.000000] Kernel command line: 8250.nr_uarts=0 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2709.boardrev=0xa02082 bcm2709.serial=0x8b98a6f3 smsc95xx.macaddr=B8:27:EB:98:A6:F3 bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Memory: 874100K/901120K available (6357K kernel code, 432K rwdata, 1716K rodata, 476K init, 764K bss, 18828K reserved, 8192K cma-reserved)
    [    0.000000] Virtual kernel memory layout:
        vector  : 0xffff0000 - 0xffff1000   (   4 kB)
        fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
        vmalloc : 0xb7800000 - 0xff800000   (1152 MB)
        lowmem  : 0x80000000 - 0xb7000000   ( 880 MB)
        modules : 0x7f000000 - 0x80000000   (  16 MB)
          .text : 0x80008000 - 0x807ea728   (8074 kB)
          .init : 0x807eb000 - 0x80862000   ( 476 kB)
          .data : 0x80862000 - 0x808ce350   ( 433 kB)
           .bss : 0x808d1000 - 0x809901ec   ( 765 kB)
    [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]  Build-time adjustment of leaf fanout to 32.
    [    0.000000] NR_IRQS:16 nr_irqs:16 16
    [    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
    [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
    [    0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
    [    0.000025] Switching to timer-based delay loop, resolution 52ns
    [    0.000287] Console: colour dummy device 80x30
    [    0.001345] console [tty1] enabled
    [    0.001389] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
    [    0.001457] pid_max: default: 32768 minimum: 301
    [    0.001788] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.001831] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.002787] Disabling cpuset control group subsystem
    [    0.002845] Initializing cgroup subsys io
    [    0.002896] Initializing cgroup subsys memory
    [    0.002960] Initializing cgroup subsys devices
    [    0.003002] Initializing cgroup subsys freezer
    [    0.003045] Initializing cgroup subsys net_cls
    [    0.003118] CPU: Testing write buffer coherency: ok
    [    0.003204] ftrace: allocating 21245 entries in 63 pages
    [    0.052482] CPU0: update cpu_capacity 1024
    [    0.052551] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [    0.052583] [bcm2709_smp_prepare_cpus] enter
    [    0.052747] Setting up static identity map for 0x8240 - 0x8274
    [    0.054394] [bcm2709_boot_secondary] cpu:1 started (0) 17
    [    0.054611] [bcm2709_secondary_init] enter cpu:1
    [    0.054655] CPU1: update cpu_capacity 1024
    [    0.054661] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [    0.055041] [bcm2709_boot_secondary] cpu:2 started (0) 17
    [    0.055205] [bcm2709_secondary_init] enter cpu:2
    [    0.055226] CPU2: update cpu_capacity 1024
    [    0.055232] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
    [    0.055591] [bcm2709_boot_secondary] cpu:3 started (0) 17
    [    0.055721] [bcm2709_secondary_init] enter cpu:3
    [    0.055741] CPU3: update cpu_capacity 1024
    [    0.055748] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
    [    0.055808] Brought up 4 CPUs
    [    0.055906] SMP: Total of 4 processors activated (153.60 BogoMIPS).
    [    0.055936] CPU: All CPU(s) started in HYP mode.
    [    0.055963] CPU: Virtualization extensions available.
    [    0.056589] devtmpfs: initialized
    [    0.067650] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
    [    0.068019] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    [    0.068743] pinctrl core: initialized pinctrl subsystem
    [    0.069291] NET: Registered protocol family 16
    [    0.074450] DMA: preallocated 4096 KiB pool for atomic coherent allocations
    [    0.081879] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
    [    0.081951] hw-breakpoint: maximum watchpoint size is 8 bytes.
    [    0.082134] Serial: AMBA PL011 UART driver
    [    0.082292] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
    [    0.082495] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
    [    0.144645] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
    [    0.145259] SCSI subsystem initialized
    [    0.145459] usbcore: registered new interface driver usbfs
    [    0.145560] usbcore: registered new interface driver hub
    [    0.145673] usbcore: registered new device driver usb
    [    0.152080] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-02-20 13:53
    [    0.179220] clocksource: Switched to clocksource arch_sys_counter
    [    0.224128] FS-Cache: Loaded
    [    0.224433] CacheFiles: Loaded
    [    0.236765] NET: Registered protocol family 2
    [    0.237637] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [    0.237775] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [    0.237986] TCP: Hash tables configured (established 8192 bind 8192)
    [    0.238102] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.238170] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.238421] NET: Registered protocol family 1
    [    0.238782] RPC: Registered named UNIX socket transport module.
    [    0.238814] RPC: Registered udp transport module.
    [    0.238842] RPC: Registered tcp transport module.
    [    0.238870] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    0.239963] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
    [    0.241341] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [    0.254591] VFS: Disk quotas dquot_6.6.0
    [    0.254925] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.257119] FS-Cache: Netfs 'nfs' registered for caching
    [    0.258045] NFS: Registering the id_resolver key type
    [    0.258112] Key type id_resolver registered
    [    0.258141] Key type id_legacy registered
    [    0.260490] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [    0.260650] io scheduler noop registered
    [    0.260687] io scheduler deadline registered (default)
    [    0.260758] io scheduler cfq registered
    [    0.263343] BCM2708FB: allocated DMA memory f6c10000
    [    0.263390] BCM2708FB: allocated DMA channel 0 @ f3007000
    [    0.272140] Console: switching to colour frame buffer device 82x26
    [    0.280287] bcm2835-rng 3f104000.rng: hwrng registered
    [    0.282692] vc-cma: Videocore CMA driver
    [    0.285055] vc-cma: vc_cma_base      = 0x00000000
    [    0.287425] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
    [    0.289730] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
    [    0.292117] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
    [    0.311275] brd: module loaded
    [    0.321928] loop: module loaded
    [    0.324844] vchiq: vchiq_init_state: slot_zero = 0xb6c80000, is_master = 0
    [    0.328413] Loading iSCSI transport class v2.0-870.
    [    0.331204] usbcore: registered new interface driver smsc95xx
    [    0.333467] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
    [    0.535946] Core Release: 2.80a
    [    0.538032] Setting default values for core params
    [    0.540189] Finished setting default values for core params
    [    0.742729] Using Buffer DMA mode
    [    0.744890] Periodic Transfer Interrupt Enhancement - disabled
    [    0.747127] Multiprocessor Interrupt Enhancement - disabled
    [    0.749435] OTG VER PARAM: 0, OTG VER FLAG: 0
    [    0.751699] Dedicated Tx FIFOs mode
    [    0.754184] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xb6c04000 dma = 0xf6c04000 len=9024
    [    0.758831] FIQ FSM acceleration enabled for :
    Non-periodic Split Transactions
    Periodic Split Transactions
    High-Speed Isochronous Endpoints
    Interrupt/Control Split Transaction hack enabled
    [    0.770678] dwc_otg: Microframe scheduler enabled
    [    0.770731] WARN::hcd_init_fiq:415: FIQ on core 1 at 0x80448d20
    [    0.773165] WARN::hcd_init_fiq:416: FIQ ASM at 0x80449090 length 36
    [    0.775533] WARN::hcd_init_fiq:441: MPHI regs_base at 0xb787e000
    [    0.777885] dwc_otg 3f980000.usb: DWC OTG Controller
    [    0.780213] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
    [    0.782572] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
    [    0.784888] Init: Port Power? op_state=1
    [    0.787139] Init: Power Port (0)
    [    0.789530] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.791835] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.794131] usb usb1: Product: DWC OTG Controller
    [    0.796373] usb usb1: Manufacturer: Linux 4.4.49-v7+ dwc_otg_hcd
    [    0.798637] usb usb1: SerialNumber: 3f980000.usb
    [    0.801706] hub 1-0:1.0: USB hub found
    [    0.803907] hub 1-0:1.0: 1 port detected
    [    0.806605] dwc_otg: FIQ enabled
    [    0.806615] dwc_otg: NAK holdoff enabled
    [    0.806623] dwc_otg: FIQ split-transaction FSM enabled
    [    0.806657] Module dwc_common_port init
    [    0.806911] usbcore: registered new interface driver usb-storage
    [    0.809342] mousedev: PS/2 mouse device common for all mice
    [    0.813280] bcm2835-cpufreq: min=600000 max=1200000
    [    0.815708] sdhci: Secure Digital Host Controller Interface driver
    [    0.817968] sdhci: Copyright(c) Pierre Ossman
    [    0.820517] sdhost: log_buf @ b6c07000 (f6c07000)
    [    0.879250] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
    [    0.883769] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
    [    0.886068] mmc-bcm2835 3f300000.mmc: DMA channel allocated
    [    0.939332] sdhci-pltfm: SDHCI platform and OF driver helper
    [    0.941941] ledtrig-cpu: registered to indicate activity on CPUs
    [    0.944315] hidraw: raw HID events driver (C) Jiri Kosina
    [    0.946748] usbcore: registered new interface driver usbhid
    [    0.949069] usbhid: USB HID core driver
    [    0.951884] Initializing XFRM netlink socket
    [    0.954149] NET: Registered protocol family 17
    [    0.956492] Key type dns_resolver registered
    [    0.959148] Registering SWP/SWPB emulation handler
    [    0.962145] registered taskstats version 1
    [    0.964470] vc-sm: Videocore shared memory driver
    [    0.966694] [vc_sm_connected_init]: start
    [    0.969383] [vc_sm_connected_init]: end - returning 0
    [    0.972881] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
    [    0.977572] of_cfs_init
    [    0.978195] mmc0: host does not support reading read-only switch, assuming write-enable
    [    0.981319] mmc0: new high speed SDHC card at address aaaa
    [    0.981883] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
    [    0.984955]  mmcblk0: p1 p2 p3
    [    0.991060] of_cfs_init: OK
    [    0.999368] Indeed it is in host mode hprt0 = 00021501
    [    1.003123] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
    [    1.006918] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
    [    1.009728] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
    [    1.010590] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
    [    1.013369] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
    [    1.018675] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
    [    1.029116] devtmpfs: mounted
    [    1.032183] Freeing unused kernel memory: 476K (807eb000 - 80862000)
    [    1.104397] mmc1: new high speed SDIO card at address 0001
    [    1.179270] usb 1-1: new high-speed USB device number 2 using dwc_otg
    [    1.181918] Indeed it is in host mode hprt0 = 00001101
    [    1.318399] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
    [    1.327172] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
    [    1.332777] systemd[1]: Detected architecture 'arm'.
    [    1.379525] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
    [    1.382297] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [    1.385911] hub 1-1:1.0: USB hub found
    [    1.388739] hub 1-1:1.0: 5 ports detected
    [    1.438306] NET: Registered protocol family 10
    [    1.442397] systemd[1]: Inserted module 'ipv6'
    [    1.446735] systemd[1]: Set hostname to <conservatory>.
    [    1.545968] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 64 bits of entropy available)
    [    1.669267] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
    [    1.747328] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 72 bits of entropy available)
    [    1.768091] random: systemd: uninitialized urandom read (16 bytes read, 72 bits of entropy available)
    [    1.769605] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
    [    1.769614] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [    1.780624] random: systemd: uninitialized urandom read (16 bytes read, 73 bits of entropy available)
    [    1.781780] smsc95xx v1.0.4
    [    1.790284] random: systemd: uninitialized urandom read (16 bytes read, 74 bits of entropy available)
    [    1.810552] random: systemd: uninitialized urandom read (16 bytes read, 74 bits of entropy available)
    [    1.817100] random: systemd: uninitialized urandom read (16 bytes read, 74 bits of entropy available)
    [    1.823581] random: systemd: uninitialized urandom read (16 bytes read, 75 bits of entropy available)
    [    1.842700] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:98:a6:f3
    [    1.864082] random: systemd: uninitialized urandom read (16 bytes read, 77 bits of entropy available)
    [    1.914885] systemd[1]: [/lib/systemd/system/mpd.service:17] Unknown lvalue 'ControlGroup' in section 'Service'
    [    1.921734] systemd[1]: [/lib/systemd/system/mpd.service:20] Unknown lvalue 'ControlGroupAttribute' in section 'Service'
    [    2.008390] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [    2.022135] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [    2.029633] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [    2.036775] systemd[1]: Starting Remote File Systems (Pre).
    [    2.044375] systemd[1]: Reached target Remote File Systems (Pre).
    [    2.048035] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [    2.059099] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [    2.066037] systemd[1]: Starting Encrypted Volumes.
    [    2.073053] systemd[1]: Reached target Encrypted Volumes.
    [    2.076398] systemd[1]: Starting Swap.
    [    2.082938] systemd[1]: Reached target Swap.
    [    2.086013] systemd[1]: Expecting device dev-mmcblk0p1.device...
    [    2.092231] systemd[1]: Starting Root Slice.
    [    2.098207] systemd[1]: Created slice Root Slice.
    [    2.101009] systemd[1]: Starting User and Session Slice.
    [    2.106789] systemd[1]: Created slice User and Session Slice.
    [    2.109539] systemd[1]: Starting Delayed Shutdown Socket.
    [    2.115160] systemd[1]: Listening on Delayed Shutdown Socket.
    [    2.117800] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [    2.123323] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [    2.125910] systemd[1]: Starting Journal Socket (/dev/log).
    [    2.131374] systemd[1]: Listening on Journal Socket (/dev/log).
    [    2.133995] systemd[1]: Starting udev Control Socket.
    [    2.139525] systemd[1]: Listening on udev Control Socket.
    [    2.142195] systemd[1]: Starting udev Kernel Socket.
    [    2.147661] systemd[1]: Listening on udev Kernel Socket.
    [    2.150360] systemd[1]: Starting Journal Socket.
    [    2.155887] systemd[1]: Listening on Journal Socket.
    [    2.158619] systemd[1]: Starting System Slice.
    [    2.164160] systemd[1]: Created slice System Slice.
    [    2.166805] systemd[1]: Starting File System Check on Root Device...
    [    2.209803] systemd[1]: Starting system-systemd\x2dfsck.slice.
    [    2.215793] systemd[1]: Created slice system-systemd\x2dfsck.slice.
    [    2.218553] systemd[1]: Starting system-getty.slice.
    [    2.224392] systemd[1]: Created slice system-getty.slice.
    [    2.227282] systemd[1]: Starting Increase datagram queue length...
    [    2.235371] systemd[1]: Starting Restore / save the current clock...
    [    2.248398] systemd[1]: Mounted Huge Pages File System.
    [    2.251737] systemd[1]: Mounting Debug File System...
    [    2.308533] systemd[1]: Starting Load Kernel Modules...
    [    2.317169] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [    2.329302] systemd[1]: Mounting POSIX Message Queue File System...
    [    2.338980] systemd[1]: Starting udev Coldplug all Devices...
    [    2.374238] systemd[1]: Started Set Up Additional Binary Formats.
    [    2.378424] systemd[1]: Starting Slices.
    [    2.385118] systemd[1]: Reached target Slices.
    [    2.393887] systemd[1]: Mounted POSIX Message Queue File System.
    [    2.399003] fuse init (API version 7.23)
    [    2.403047] systemd[1]: Mounted Debug File System.
    [    2.410128] systemd[1]: Started Increase datagram queue length.
    [    2.425765] systemd[1]: Started Restore / save the current clock.
    [    2.434061] systemd[1]: Started Load Kernel Modules.
    [    2.441086] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [    2.453961] systemd[1]: Time has been changed
    [    2.480923] systemd[1]: Started File System Check on Root Device.
    [    2.507410] systemd[1]: Started udev Coldplug all Devices.
    [    2.623781] systemd[1]: Starting Create Static Device Nodes in /dev...
    [    2.679860] systemd[1]: Starting Apply Kernel Variables...
    [    2.689132] systemd[1]: Mounting Configuration File System...
    [    2.698537] systemd[1]: Mounting FUSE Control File System...
    [    2.708098] systemd[1]: Starting Syslog Socket.
    [    2.715202] systemd[1]: Listening on Syslog Socket.
    [    2.718399] systemd[1]: Starting Journal Service...
    [    2.728514] systemd[1]: Started Journal Service.
    [    2.887513] systemd-udevd[140]: starting version 215
    [    3.279524] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
    [    3.296544] bcm2708_i2c 3f804000.i2c: BSC1 Controller at 0x3f804000 (irq 83) (baudrate 100000)
    [    3.304128] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
    [    3.450591] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered
    [    3.450619] snd-rpi-hifiberry-dacplus soc:sound: snd_soc_register_card() failed: -517
    [    3.566149] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
    [    3.591013] pcm512x 1-004d: Failed to reset device: -5
    [    3.591122] pcm512x: probe of 1-004d failed with error -5
    [    3.626992] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered
    [    3.627003] snd-rpi-hifiberry-dacplus soc:sound: snd_soc_register_card() failed: -517
    [    3.637819] usbcore: registered new interface driver brcmfmac
    [    3.637840] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered
    [    3.637850] snd-rpi-hifiberry-dacplus soc:sound: snd_soc_register_card() failed: -517
    [    3.794937] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: May 27 2016 00:13:38 version 7.45.41.26 (r640327) FWID 01-df77e4a7
    [    3.796831] random: nonblocking pool is initialized
    [    3.817988] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
    [    3.866269] brcmfmac: power management disabled
    [    3.871700] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
    [    3.871733] cfg80211: World regulatory domain updated:
    [    3.871742] cfg80211:  DFS Master region: unset
    [    3.871752] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [    3.871766] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [    3.871779] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [    3.871792] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
    [    3.871806] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
    [    3.871820] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
    [    3.871833] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [    3.871845] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
    [    3.871857] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
    [    4.127393] systemd-journald[138]: Received request to flush runtime journal from PID 1
    [    4.744182] Adding 102396k swap on /var/swap.  Priority:-1 extents:7 across:307200k SSFS
    [    4.940576] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
    [    4.980796] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists
    [    4.980808] brcmfmac: brcmf_add_if: ignore IF event
    [    4.985011] brcmfmac: power management disabled
    [    6.535628] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
    

    And the output of sudo vcdbg log msg is;

    
    001106.835: HDMI:EDID error reading EDID block 0 attempt 0
    001108.099: HDMI:EDID error reading EDID block 0 attempt 1
    001109.358: HDMI:EDID error reading EDID block 0 attempt 2
    001110.616: HDMI:EDID error reading EDID block 0 attempt 3
    001111.875: HDMI:EDID error reading EDID block 0 attempt 4
    001113.132: HDMI:EDID error reading EDID block 0 attempt 5
    001114.391: HDMI:EDID error reading EDID block 0 attempt 6
    001115.648: HDMI:EDID error reading EDID block 0 attempt 7
    001116.907: HDMI:EDID error reading EDID block 0 attempt 8
    001118.164: HDMI:EDID error reading EDID block 0 attempt 9
    001119.186: HDMI:EDID giving up on reading EDID block 0
    001133.011: HDMI:Setting property pixel encoding to Default
    001133.031: HDMI:Setting property pixel clock type to PAL
    001133.050: HDMI:Setting property content type flag to No data
    001133.069: HDMI:Setting property fuzzy format match to enabled
    001376.770: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
    001376.806: hdmi: Setting state machine clock to 163682864 Hz
    001377.859: hdmi: requested state machine clock @ 163682864 Hz, measured as 163683000 Hz
    001377.876: hdmi: HDMI:>>>>>>>>>>>>>Rx sensed, reading EDID<<<<<<<<<<<<<
    001378.172: hdmi: HDMI:EDID error reading EDID block 0 attempt 0
    001379.432: hdmi: HDMI:EDID error reading EDID block 0 attempt 1
    001380.693: hdmi: HDMI:EDID error reading EDID block 0 attempt 2
    001381.954: hdmi: HDMI:EDID error reading EDID block 0 attempt 3
    001383.215: hdmi: HDMI:EDID error reading EDID block 0 attempt 4
    001384.476: hdmi: HDMI:EDID error reading EDID block 0 attempt 5
    001385.737: hdmi: HDMI:EDID error reading EDID block 0 attempt 6
    001386.998: hdmi: HDMI:EDID error reading EDID block 0 attempt 7
    001388.259: hdmi: HDMI:EDID error reading EDID block 0 attempt 8
    001389.520: hdmi: HDMI:EDID error reading EDID block 0 attempt 9
    001390.545: hdmi: HDMI:EDID giving up on reading EDID block 0
    001390.576: hdmi: HDMI: No lookup table for resolution group 0
    001390.594: hdmi: HDMI: hotplug attached with DVI support
    001390.625: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
    001390.916: hdmi: HDMI:EDID error reading EDID block 0 attempt 0
    001392.179: hdmi: HDMI:EDID error reading EDID block 0 attempt 1
    001393.442: hdmi: HDMI:EDID error reading EDID block 0 attempt 2
    001394.705: hdmi: HDMI:EDID error reading EDID block 0 attempt 3
    001395.968: hdmi: HDMI:EDID error reading EDID block 0 attempt 4
    001397.231: hdmi: HDMI:EDID error reading EDID block 0 attempt 5
    001398.494: hdmi: HDMI:EDID error reading EDID block 0 attempt 6
    001399.757: hdmi: HDMI:EDID error reading EDID block 0 attempt 7
    001401.020: hdmi: HDMI:EDID error reading EDID block 0 attempt 8
    001402.283: hdmi: HDMI:EDID error reading EDID block 0 attempt 9
    001403.309: hdmi: HDMI:EDID giving up on reading EDID block 0
    001405.655: hdmi: HDMI: hotplug deassert
    001405.668: hdmi: HDMI: HDMI is currently off
    001405.681: hdmi: HDMI: changing mode to unplugged
    001405.704: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
    001408.748: *** Restart logging
    001409.938: Read command line from file 'cmdline.txt'
    dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
    001664.090: Loading 'kernel7.img' to 0x8000 size 0x409768
    001673.650: No kernel trailer (run mkknlimg to fix) - assuming DT-capable
    001681.140: Loading 'bcm2710-rpi-3-b.dtb' to 0x411768 size 0x3e78
    001692.340: dtdebug: delete_node(/__local_fixups__)
    001698.632: dtdebug: /aliases:i2c_vc=i2c0
    001704.260: dtdebug: /__symbols__:i2c_vc=i2c0
    001708.768: dtdebug: /__overrides__:i2c_vc=i2c0
    001717.490: dtdebug: /__overrides__:i2c_vc_baudrate=i2c0_baudrate
    001720.571: dtdebug: /aliases:i2c=i2c1
    001726.412: dtdebug: /__symbols__:i2c=i2c1
    001731.014: dtdebug: /__overrides__:i2c=i2c1
    001734.128: dtdebug: /aliases:i2c_arm=i2c1
    001739.998: dtdebug: /__symbols__:i2c_arm=i2c1
    001744.628: dtdebug: /__overrides__:i2c_arm=i2c1
    001753.535: dtdebug: /__overrides__:i2c_baudrate=i2c1_baudrate
    001762.489: dtdebug: /__overrides__:i2c_arm_baudrate=i2c1_baudrate
    001762.518: dtparam: uart0_clkrate=48000000
    001765.529: dtdebug: Found override uart0_clkrate
    001765.579: dtdebug:   override uart0_clkrate: cell target clock-frequency @ offset 0 (size 4)
    001781.362: dtparam: audio=off
    001784.516: dtdebug: Found override audio
    001784.551: dtdebug:   override audio: string target 'status'
    001797.387: dtdebug: Opened overlay file 'overlays/hifiberry-dacplus.dtbo'
    001815.748: Loaded overlay 'hifiberry-dacplus'
    001815.802: dtdebug: Found fragment 0 (offset 36)
    001822.038: dtdebug: merge_fragment(/clocks,/fragment@0/__overlay__)
    001827.032: dtdebug: merge_fragment(/clocks/dacpro_osc,/fragment@0/__overlay__/dacpro_osc)
    001827.059: dtdebug:   +prop(compatible)
    001827.841: dtdebug:   +prop(#clock-cells)
    001828.720: dtdebug:   +prop(phandle)
    001829.586: dtdebug: merge_fragment() end
    001829.614: dtdebug: merge_fragment() end
    001829.688: dtdebug: Found fragment 1 (offset 184)
    001834.415: dtdebug: merge_fragment(/soc/i2s@7e203000,/fragment@1/__overlay__)
    001834.441: dtdebug:   +prop(status)
    001835.959: dtdebug: merge_fragment() end
    001836.015: dtdebug: Found fragment 2 (offset 260)
    001844.560: dtdebug: merge_fragment(/soc/i2c@7e804000,/fragment@2/__overlay__)
    001844.587: dtdebug:   +prop(#address-cells)
    001845.700: dtdebug:   +prop(#size-cells)
    001846.820: dtdebug:   +prop(status)
    001851.940: dtdebug: merge_fragment(/soc/i2c@7e804000/pcm5122@4d,/fragment@2/__overlay__/pcm5122@4d)
    001851.967: dtdebug:   +prop(#sound-dai-cells)
    001853.175: dtdebug:   +prop(compatible)
    001854.263: dtdebug:   +prop(reg)
    001855.423: dtdebug:   +prop(clocks)
    001856.579: dtdebug:   +prop(status)
    001857.798: dtdebug: merge_fragment() end
    001857.829: dtdebug: merge_fragment() end
    001857.910: dtdebug: Found fragment 3 (offset 480)
    001868.699: dtdebug: merge_fragment(/soc/sound,/fragment@3/__overlay__)
    001868.727: dtdebug:   +prop(compatible)
    001869.618: dtdebug:   +prop(i2s-controller)
    001870.921: dtdebug:   +prop(status)
    001871.816: dtdebug: merge_fragment() end
    001876.084: dtdebug: /aliases:serial0=uart1
    001879.241: dtdebug: /aliases:serial1=uart0
    001879.400: dtparam: uart1=off
    001882.501: dtdebug: Found override uart1
    001882.535: dtdebug:   override uart1: string target 'status'
    002756.573: dtparam: arm_freq=1200000000
    002759.785: dtdebug: Found override arm_freq
    002759.835: dtdebug:   override arm_freq: cell target clock-frequency @ offset 0 (size 4)
    002770.128: dtdebug:   override arm_freq: cell target clock-frequency @ offset 0 (size 4)
    002780.503: dtdebug:   override arm_freq: cell target clock-frequency @ offset 0 (size 4)
    002790.973: dtdebug:   override arm_freq: cell target clock-frequency @ offset 0 (size 4)
    002803.838: dtparam: core_freq=400000000
    002807.178: dtdebug: Found override core_freq
    002807.226: dtdebug:   override core_freq: cell target clock-frequency @ offset 0 (size 4)
    002815.989: dtparam: cache_line_size=64
    002819.175: dtdebug: Found override cache_line_size
    002819.223: dtdebug:   override cache_line_size: cell target cache-line-size @ offset 0 (size 4)
    002831.023: dtdebug: delete_node(/hat)
    002838.614: Device tree loaded to 0x2effbb00 (size 0x447e)
    002844.128: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
    003587.256: vchiq_core: vchiq_init_state: slot_zero = 0xf6c80000, is_master = 1
    003591.461: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
    003592.713: cec: setting callback (0x3DCA9D08)
    
    21. Februar 2017 at 14:50 #27086

    Dear Benjamin,

    Have you tried to play audio form the pi directly without HiFiBerry DAC. what are the the settings that you have configured in the Audioplayer and on the HiFiBerry DAC plugins ?

    Regards,
    Mohammad Mbydeen

    10. März 2017 at 15:49 #27545

    Hi Mohammad,

    The raspberry pi will play audio fine through the built in headphone port – I have had it setup this way now a few weeks as I have been busy with another project.

    The Hifi Berry DAC plugin in configured to „HifiBerry DAC+ (B+/Pi 2/3)“, the volume controls for Digital Volume etc are all set at 0. Any adjustments are not saved.

    The audioplayer output is „sysdefault – BCM2385 ALSA“ as there is no hifiberry outputs visible.

    Regards

    Ben

    13. März 2017 at 13:41 #27656

    Hi Benjamin Purchase

    Have you tried to burn new image, if the system does not recognise HiFiberry, it could be a hardware problem, have you checked it ?

    Best Regards,
    Mohamamd Mbydeen

    28. Mai 2018 at 22:49 #35939

    Hi,

    I have the exact same problem. When I select the „HiFi Berry DAC+ (PI 2/3)“ I see no soundcard in the Alsamixer. When I select the „HiFi Berry DAC (PI A/B)“ I see the soundcard in the Alsamixer and have sound.

    With the „HiFi Berry DAC+ (PI 2/3)“ selected I get following error with dmesg | grep hifiberry

    [    3.588122] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered - will retry
    [    3.642450] pcm512x 1-004d: Failed to reset device: -121
    [    3.642930] pcm512x: probe of 1-004d failed with error -121
    [    3.749829] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered - will retry
    [    3.757893] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered - will retry

    I already tried this: https://www.hifiberry.com/build/documentation/configuring-linux-3-18-x/

    I have a fresh install of m2p_stretch_rpi_245.img.zip. Already tried also with a fresh install of m2p_rpi_default_244_wps_ap_expand.img.zip. I have also tried differend Rasperry Pi 3B v1.2

    What can I do?

    P.S. Sorry I’m a Linux newbee, so if some informations are missing tell me how and I will give you the informations needed 🙂

    Thanks!

    • This reply was modified 5 years, 10 months ago by mrmanuel.
    30. Mai 2018 at 11:37 #35971

    Hi Manuel,

    You do not need to enter SSH in Max2Play, all config is done from the web interface.

    Select „none“ in the HiFiBerry plugin sound card selection, reboot, select the exact sound card you have (I assume HiFiBerry DAC+) and reboot again. Afterwards, your sound card will work with Squeezelite and Shairport if you select „advanced“ in the HiFiBerry plugin.

    30. Mai 2018 at 14:27 #35975

    Hi Heiner,

    thanks for your reply, but unfortunately this do not work. In the web interface -> HiFi Berry I can’t find a button/link with advanced. If I go to Audioplayer -> Squeezelite -> Edit Advanced Options I see no soundcard available. I tried the same on different Raspberry Pi 3B with different HiFiBerry DAC+ on fresh installed max2play installations.

    30. Mai 2018 at 15:32 #35979

    Hi Manuel,

    When you first start Max2Play, it should ask you which sound card you have. After selecting HiFiBerry, you should get the page where you can select advanced as an option while also selection the specific HiFiBerry sound card you are using.

    30. Mai 2018 at 15:54 #35980

    Hi Heiner,

    I had setup the HiFiBerry DAC+ and below I started the „Advanced: A real multiroom audio player that integrates in a Squeezebox environment with powerful options for high-quality audio and a lot of features.“ setup, but I have still no sound and the sound card is not recognized. As written in my first post the sound card is not recognized from the system, maybe the driver is not loaded correctly?

    Very strange for me is, that it only happens to me and not other users, as I have a standard setup.

    31. Mai 2018 at 10:10 #35994

    Did you alter some things via SSH? If so, please try burning a new image and setting it up from scratch to rule out a dependency issue.

    31. Mai 2018 at 14:02 #35995

    I did a fresh install to be sure that nothing else was changed. After fresh install I changed nothing except the sound card.

    1. Juni 2018 at 14:01 #36006

    Please disable build in audio in the Raspberry Settings and add „hw:0“ to your player next.

    2. Juni 2018 at 11:17 #36020

    I disabled the build in audio and nothing happened. When I check the alsamixer no sound card is displayed anymore. Maybe I forgot a important detail. I have the HiFiBerry DAC+ RTC.

    In my opinion there is a bug somewhere, because the Linux OS do not recognize the sound card with the „hifiberry-dacplus“ in /boot/config.txt but with „hifiberry-dac“.

    If you want I can give you direct access to the raspberry.

    4. Juni 2018 at 13:51 #36054

    Hi manuel,

    The RTC does not have hw volume control. You need to use the DAC or DAC+ light selection.

    4. Juni 2018 at 19:41 #36079

    Hi Heiner,

    thanks a lot. Missed this information :/ sorry for wasting your time!

    5. Juni 2018 at 13:46 #36087

    No problem and no time wasted! 🙂

Viewing 17 posts - 1 through 17 (of 17 total)

You must be logged in to reply to this topic.

Register here