Max2Play Home › Forums › Max2Play Add-ons › CEC not Working properly with Panasonic TV
Tagged: CEC Panasonic
- This topic has 3 replies, 2 voices, and was last updated 7 years ago by Mbydeen.
-
Posted in: Max2Play Add-ons
-
26. März 2017 at 1:58 #27854
Hi,
when trying to use the CEC Feature in Jivelite, I encounter Problems with my Panasonic TV.
If I press Down onetimes (short), then the mark is moving one row down followed by 4 rows down. Same behavior with every Navigation Button.I started Kodi and there I have similar problems. Using Kodi with openelec for several years, I never had this problems with my TV before.
Can I configure the Key Repeats in any way?Thanks in advance.
Max2Play 2.41 Raspi 2 with Panasonic TX-42ASW654
27. März 2017 at 13:42 #27866Hi anesthesia
Have you tried to reinstall CEC-Support for HDMI ?Please note that CEC-Support for HDMI to control Jivelite and Desktop with your TV’s remote control. This compiles and adds libcec-daemon to the autostart of Max2Play. You need a HDMI-Cable that supports CEC (some thin cables do not!) and the TV must be turned on before starting Max2Play as it needs to recognize the CEC-Device on boot.
Regards,
Mohammad Mbydeen27. März 2017 at 14:28 #27870Hi,
I have reinstalled CEC Support but it doesn’t work as it should.
Using Kodi in an openelec Image is working well.Seems that my Button Pressed Signal is repeated several times.
-
You must be logged in to reply to this topic.