Bluetooth streaming is disconnecting after a few minutes

Max2Play Home Forums Max2Play Add-ons Bluetooth streaming is disconnecting after a few minutes

Viewing 9 posts - 1 through 9 (of 9 total)
  • 9. Januar 2017 at 13:02 #25689

    Hi,

    I am streaming music via Bluetooth from my phone/tablet/amazon echot dot to Squeezebox Server. After a few minutes the music stopps playing without a reason. The bluetooth connection is still active. Only disconnect/reconnect helps for the next few minutes. I have no clue what the causes this behavior. Any suggestions?

    regards, heinzelrumpel

    16. Januar 2017 at 14:22 #25938

    Hi heinzelrumpel,
    Do all your devices have this issue in the same vein or do their drop-outs differ? You might also want to try disabling the built-in WiFi (Raspberry Settings) to rule it out as a source of error.

    16. Januar 2017 at 20:04 #25979

    Yes, all devices have the same issue, more or less. With my LG3 I get the best experience. After installimg from scratch it was the first device connected via bluetooth. Sometimes the connection lasts for 15-20 minutes without interrupts, but sometimes not. Echo dot does sometimes not even play right away. I have to disconnect and reconnect twice to get it work, but still, after a few minutes playing it stops. With fire tablet its the same. Distance is no issue, because m2p and devices are not more than 5m away, no walls etc.With all devices, the actual bluetooth connection is not lost, just the streaming does not produce any output to the speakers via HifiBerry AMp+ . Is there a way I can debug this?

    I could try disabling inernal wifi as you mentioned, but getting the description right, it only moves binding of adapter from wlan0 to wlan1. Dont see any improvements in doing so.

    [img]http://up.picr.de/28039022vn.jpg[/img]

    • This reply was modified 7 years, 2 months ago by heinzelrumpel.
    16. Januar 2017 at 20:28 #25983

    Just disabled internal wifi, then restartet raspberry. Outcome was, tha squeezelite won’t start. Reversed and now it at least plays again.

    Jan 16 19:18:30 max2play mtp-probe: checking bus 1, device 3: „/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1“
    Jan 16 19:18:30 max2play mtp-probe: checking bus 1, device 8: „/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3“
    Jan 16 19:18:30 max2play mtp-probe: bus: 1, device: 8 was not an MTP device
    Jan 16 19:18:30 max2play mtp-probe: bus: 1, device: 3 was not an MTP device
    Jan 16 19:19:11 max2play pulseaudio[1227]: [pulseaudio] bluez4-util.c: org.bluez.Manager.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method „GetProperties“ with signature „“ on interface „org.bluez.Manager“ doesn’t exist
    Jan 16 19:19:12 max2play pulseaudio[1227]: [pulseaudio] socket-server.c: bind(): Die Adresse wird bereits verwendet
    Jan 16 19:19:12 max2play pulseaudio[1227]: [pulseaudio] module.c: Failed to load module „module-cli-protocol-unix“ (argument: „“): initialization failed.
    Jan 16 19:19:18 max2play org.gtk.Private.AfcVolumeMonitor[1199]: Volume monitor alive
    Jan 16 19:21:30 max2play pulseaudio[1227]: [bluetooth] module-bluez5-device.c: SBC decoding error (-2)
    Jan 16 19:25:15 max2play mtp-probe: checking bus 1, device 8: „/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3“
    Jan 16 19:25:15 max2play mtp-probe: bus: 1, device: 8 was not an MTP device
    Jan 16 19:25:15 max2play mtp-probe: checking bus 1, device 3: „/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1“
    Jan 16 19:25:15 max2play mtp-probe: bus: 1, device: 3 was not an MTP device
    Jan 16 19:25:26 max2play pulseaudio[971]: [autospawn] core-util.c: Failed to create secure directory (/run/user/1000/pulse): Datei oder Verzeichnis nicht gefunden
    Jan 16 19:25:26 max2play pulseaudio[971]: [autospawn] lock-autospawn.c: Fehler beim Zugriff auf Autostart-Sperre.
    Jan 16 19:25:26 max2play pulseaudio[971]: [pulseaudio] main.c: Failed to acquire autospawn lock
    Jan 16 19:25:49 max2play pulseaudio[1263]: [pulseaudio] bluez4-util.c: org.bluez.Manager.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method „GetProperties“ with signature „“ on interface „org.bluez.Manager“ doesn’t exist
    Jan 16 19:26:02 max2play org.gtk.Private.AfcVolumeMonitor[1238]: Volume monitor alive
    Jan 16 19:29:05 max2play pulseaudio[1263]: [bluetooth] module-bluez5-device.c: SBC decoding error (-2)

    Jan 16 19:25:19 max2play kernel: [ 11.611004] Bluetooth: HCI device and connection manager initialized
    Jan 16 19:25:19 max2play kernel: [ 11.611030] Bluetooth: HCI socket layer initialized
    Jan 16 19:25:19 max2play kernel: [ 11.611049] Bluetooth: L2CAP socket layer initialized
    Jan 16 19:25:19 max2play kernel: [ 11.611087] Bluetooth: SCO socket layer initialized
    Jan 16 19:25:19 max2play kernel: [ 11.618574] Bluetooth: HCI UART driver ver 2.3
    Jan 16 19:25:19 max2play kernel: [ 11.618600] Bluetooth: HCI UART protocol H4 registered
    Jan 16 19:25:19 max2play kernel: [ 11.618610] Bluetooth: HCI UART protocol Three-wire (H5) registered
    Jan 16 19:25:19 max2play kernel: [ 11.618824] Bluetooth: HCI UART protocol BCM registered
    Jan 16 19:25:19 max2play kernel: [ 11.880380] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    Jan 16 19:25:19 max2play kernel: [ 11.880400] Bluetooth: BNEP filters: protocol multicast
    Jan 16 19:25:19 max2play kernel: [ 11.880423] Bluetooth: BNEP socket layer initialized
    Jan 16 19:25:23 max2play kernel: [ 15.858998] FS-Cache: Netfs ‚cifs‘ registered for caching
    Jan 16 19:25:23 max2play kernel: [ 15.859829] Key type cifs.spnego registered
    Jan 16 19:25:23 max2play kernel: [ 15.859892] Key type cifs.idmap registered
    Jan 16 19:25:26 max2play kernel: [ 18.668019] Adding 102396k swap on /var/swap. Priority:-1 extents:7 across:307200k SSFS
    Jan 16 19:25:51 max2play kernel: [ 35.418229] Bluetooth: hci0 command 0x0c24 tx timeout
    Jan 16 19:25:53 max2play kernel: [ 37.418258] Bluetooth: hci0 command 0x0c52 tx timeout
    Jan 16 19:26:24 max2play kernel: [ 68.098617] input: 68:54:FD:88:4F:8A as /devices/virtual/input/input0
    Jan 16 19:29:05 max2play kernel: [ 229.175693] Bluetooth: hci0: Frame reassembly failed (-84)
    Jan 16 19:29:05 max2play kernel: [ 229.175762] Bluetooth: hci0: Frame reassembly failed (-84)
    Jan 16 19:29:05 max2play kernel: [ 229.175851] Bluetooth: hci0: Frame reassembly failed (-84)
    Jan 16 19:29:05 max2play kernel: [ 229.175933] Bluetooth: hci0: Frame reassembly failed (-84)
    Jan 16 19:29:05 max2play kernel: [ 229.176019] Bluetooth: hci0: Frame reassembly failed (-84)
    Jan 16 19:29:05 max2play kernel: [ 229.176107] Bluetooth: hci0: Frame reassembly failed (-84)
    Jan 16 19:29:05 max2play kernel: [ 229.176194] Bluetooth: hci0: Frame reassembly failed (-84)
    Jan 16 19:29:05 max2play kernel: [ 229.176282] Bluetooth: hci0: Frame reassembly failed (-84)
    Jan 16 19:29:05 max2play kernel: [ 229.176369] Bluetooth: hci0: Frame reassembly failed (-84)
    Jan 16 19:29:05 max2play kernel: [ 229.176466] Bluetooth: hci0: Frame reassembly failed (-84)

    20. Januar 2017 at 14:53 #26154

    Hi heinzel,
    We made some bug fixes in the new version to the Bluetooth plugin. Please try updating to version 2.40

    19. November 2017 at 12:47 #32534

    I have the same problem with my Amazon Echo, but it works with my iPhone 6+. I installed the latest max2play yesterday (Version 2.44 on RPI 3).

    @Heinzrumpel: Did you solve this issue?

    Thanks and regards

    Harald

    23. November 2017 at 17:02 #32591

    Hi Harald,

    Did you update your version of the Bluetooth Plugin, yet? Please try installing the current version if you have not yet.

    23. November 2017 at 22:33 #32610

    I installed the BT plugin from your website last Saturday. I guess this is the latest official version.

    28. November 2017 at 11:32 #32656

    Could you try making a beta update, and also deactivating WiFi if you have not yet tried to?

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.

Register here