- This topic has 465 replies, 1 voice, and was last updated 4 months ago by
.
-
@heinzelrumpel: the only problems I had with Bluetooth (same as yours: disconnect sometimes while playing) was, when the powersupply was not giving enough power. If you have some kind of powered USB-Hub, you could try to connect the Bluetooth stick there and see if this solves your problem. What else do you have connected to your Pi? You may also (just for testing) remove everything but the Bluetooth dongle, to see if the power is a problem.
@treedweller: after the first pairing from the Max2Play web interface (device is trusted and paired), the bluetooth device should be connected and also available for further connections on your smartphone, even if the connection drops. Can you check your smartphone and initiate the connection from your smartphone (open bluetooth settings and connect to Max2Play). When using the web interface to connect, it will trust & pair ( & maybe connect) -> disconnect -> connect again. When reloading the bluetooth page with the reload button on the web interface the connection should be indicated as green.
Hi flysurfer.
I am having a similar issue but with a different device
If you connected Bluetooth Speakers, make sure to set the soundcard of your audioplayers to PULSE (advanced settings Squeezelite) to get them to play with Bluetooth! If you connected a Smartphone to stream to Squeezebox Server, NO further setting to your soundcard is needed (do NOT set your soundcard to pulse)! User pi is Set Device 88:C6:26:55:FF:02 UE ROLL Device 00:1C:97:11:8D:97 clipsal0 trust 00:1C:97:11:8D:97 Changing 00:1C:97:11:8D:97 trust succeeded pair 00:1C:97:11:8D:97 Attempting to pair with 00:1C:97:11:8D:97 Device 00:1C:97:11:8D:97 Connected: yes Failed to pair: org.bluez.Error.AuthenticationFailed Device 00:1C:97:11:8D:97 Connected: no connect 00:1C:97:11:8D:97 Attempting to connect to 00:1C:97:11:8D:97 Device 00:1C:97:11:8D:97 Connected: yes Failed to connect: org.bluez.Error.Failed Device 00:1C:97:11:8D:97 Connected: no Device 00:1C:97:11:8D:97 Connected: yes quit Name: clipsal0 Address: 00:1C:97:11:8D:97 Icon: audio-card Class: 0x24c400 Paired: 0 Connected: 1 Update Configfile - existing Entry changedI am able to pair with a different set of speakers but I am wondering what may be causing this particular set of speakers to not function correctly.
EDIT: I have followed other guides and used SSH to initiate commands manually but with the same result. There is nothing that indicates I need to enter a PIN and I even tried removing the pin entirely from the device but it still will not authenticate.
EDIT2: Would you believe that I posted that question after around 8 hours of fiddling and 15 minutes after posting I’ve managed to fix it. I had to SSH into the Pi and use bluetooth control with a -a option. This popped up the pin request prompt and I was able to enter it. Without using the -a option I don’t get a prompt at all
so in summary the command was
sudo bluetoothctl -aWhat Raspberry Pi do you use and what Max2Play SD-Card-Image did you install?
Raspi 3 mit integriertem BluetoothWhat Max2Play-Version do you use?
v2.42What is the output of the “DEBUG” window at the bottom of the bluetooth addon?
#### Bluetooth Installation #### #### Bluetooth Dongle #### hci0: Type: BR/EDR Bus: UART BD Address: B8:27:EB:25:22:FF ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:5670 acl:60 sco:0 events:387 errors:0 TX bytes:425904 acl:557 sco:0 commands:73 errors:0 #### DEVICE D0-03-4B-32-6D-6A #### [D0:03:4B:32:6D:6A] Name: (null) Alias: (null) [rw] Address: (null) Icon: (null) Class: 0x0 Paired: 0 Trusted: 0 [rw] Blocked: 0 [rw] Connected: 0 UUIDs: [ #### DEVICE LS 1605 #### [99:99:22:00:13:48] Name: LS 1605 Alias: LS 1605 [rw] Address: 99:99:22:00:13:48 Icon: audio-card Class: 0x240404 Paired: 1 Trusted: 1 [rw] Blocked: 0 [rw] Connected: 1 UUIDs: [Headset, AudioSink, AVRemoteControlTarget, AdvancedAudioDistribution, AVRemoteControl, Handsfree] #### PACMD LIST | grep active #### active port: <analog-output> active port: <analog-output> active port: <headset-output> active profile: <output:analog-stereo> active profile: <output:analog-stereo> active profile: <a2dp> #### PACMD LIST | grep sink #### Default sink name: bluez_sink.99_99_22_00_13_48 module.description = "When a bluetooth sink or source is added, load module-loopback" module.description = "Automatically restore the default sink and source" module.description = "When a sink/source is removed, try to move its streams to the default sink/source" name: <module-always-sink> module.description = "Always keeps at least one sink loaded even if it's a null one" module.description = "When a sink/source is idle for too long, suspend it" module.description = "Load filter sinks automatically when needed" module.description = "BlueZ 5 Bluetooth audio sink and source" 3 sink(s) available. name: <bluez_sink.99_99_22_00_13_48> bluetooth.protocol = "a2dp_sink" name: <bluez_sink.99_99_22_00_13_48.monitor> sinks: sinks: sinks: bluez_sink.99_99_22_00_13_48/#3: LS 1605 bluez_sink.99_99_22_00_13_48.monitor/#3: Monitor of LS 1605 0 sink input(s) available. #### X-SERVER RUNNING #### 1 #### PULSEAUDIO RUNNING #### 1 S 1000 1266 1 0 80 0 - 28349 - ? 00:00:01 pulseaudio 1 S 1000 1363 1 0 80 0 - 478 - ? 00:00:00 start-pulseaudiWhat exaclty is not working? Pairing, Connecting, Playing Audio, Reconnecting on Reboot,…
Pairing funktioniert.
Ich habe beim Audioplayer – PulseAudio eingestellt, höre jedoch keinen Ton am Speaker wenn ich vom LMS etwas abspiele,…@peterng: Thanks for this info! I never had a device with PIN for testing so far. I think in that special case it is needed to manually use SSH and the command you posted until I figure out how to send this PIN with the commandline from the web interface.
@eriche: looks good so far. Device is connected, BUT according to your log file, there seem to be multiple card profiles recognized at your speaker. This might lead to using the wrong output or mode. Is your Bluetooth Speaker also capable of recording (e.g. streaming bluetooth instead receiving)?
If possible, can you login with SSH as user „pi“ and change the current card-profile to test if this fixes the No-Sound-Error. The command to find the possible modes of your bluetooth speaker and the command to change the profile should be:
pacmd list-cards
and to set to a2dp (should be output)
pacmd set-card-profile bluez_sink.99_99_22_00_13_48 a2dpI added a more detailed output to the latest Max2Play-BETA, that shows all card profiles in the Debug Output on the Bluetooth page. Maybe you can update to the Beta and send the last entry from the Debug output. This might help me to tell you if the problem is indeed caused by multiple card profiles.
I will try to add a „profile“-chooser to one of the following versions of Max2Play.
I updated to Version Beta-170411 – hope this is the one with the additional debug infos.
Your command is not working for me 🙁
pi@max2play:~ $ pacmd set-card-profile bluez_sink.99_99_22_00_13_48 a2dp No card found by this name or index.Here my output of the list-cards
pi@max2play:~ $ pacmd list-cards 3 card(s) available. index: 0 name: <alsa_card.platform-soc_sound> driver: <module-alsa-card.c> owner module: 6 properties: alsa.card = "1" alsa.card_name = "IQaudIODAC" alsa.long_card_name = "IQaudIODAC" alsa.driver_name = "snd_soc_iqaudio_dac" device.bus_path = "platform-soc:sound" sysfs.path = "/devices/platform/soc/soc:sound/sound/card1" device.string = "1" device.description = "IQaudIODAC" module-udev-detect.discovered = "1" device.icon_name = "audio-card" profiles: output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown) off: Off (priority 0, available: unknown) active profile: <output:analog-stereo> sinks: alsa_output.platform-soc_sound.analog-stereo/#0: IQaudIODAC Analog Stereo sources: alsa_output.platform-soc_sound.analog-stereo.monitor/#0: Monitor of IQaudIODAC Analog Stereo ports: analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown) properties: index: 1 name: <alsa_card.0> driver: <module-alsa-card.c> owner module: 7 properties: alsa.card = "0" alsa.card_name = "bcm2835 ALSA" alsa.long_card_name = "bcm2835 ALSA" device.bus_path = "/devices/virtual/sound/card0" sysfs.path = "/devices/virtual/sound/card0" device.string = "0" device.description = "bcm2835 ALSA" module-udev-detect.discovered = "1" device.icon_name = "audio-card" profiles: output:analog-mono: Analog Mono Output (priority 100, available: unknown) output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown) off: Off (priority 0, available: unknown) active profile: <output:analog-stereo> sinks: alsa_output.0.analog-stereo/#1: bcm2835 ALSA Analog Stereo sources: alsa_output.0.analog-stereo.monitor/#1: Monitor of bcm2835 ALSA Analog Stereo ports: analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown) properties: index: 2 name: <bluez_card.99_99_22_00_13_48> driver: <module-bluez5-device.c> owner module: 28 properties: device.description = "LS 1605" device.string = "99:99:22:00:13:48" device.api = "bluez" device.class = "sound" device.bus = "bluetooth" device.form_factor = "headset" bluez.path = "/org/bluez/hci0/dev_99_99_22_00_13_48" bluez.class = "0x240404" bluez.alias = "LS 1605" device.icon_name = "audio-headset-bluetooth" device.intended_roles = "phone" profiles: a2dp: High Fidelity Playback (A2DP Sink) (priority 10, available: unknown) off: Off (priority 0, available: yes) active profile: <a2dp> sinks: bluez_sink.99_99_22_00_13_48/#2: LS 1605 sources: bluez_sink.99_99_22_00_13_48.monitor/#2: Monitor of LS 1605 ports: headset-output: Headset (priority 0, latency offset 0 usec, available: unknown) properties: headset-input: Headset (priority 0, latency offset 0 usec, available: no) properties:I have my IQAudio Soundcard as you noticed but want to use for testing my Bluetooth Speaker.
So a Profile chooser would be great 😉Please tell me what to do neXt,…
You must be logged in to reply to this topic.